The Blastcrete Equipment Company RD6536 Skid Steer Pump is a rugged universal mount concrete pump attachment designed for high-efficiency material placement in modern construction environments. Built for compatibility, performance, and durability, it integrates seamlessly with skid steer loaders using a universal mounting plate system.
High-Performance Skid Steer Pump Attachment
The RD6536 is engineered as a hydraulic squeeze pump system capable of delivering consistent concrete flow for a wide range of construction applications. Its variable output from 0 to 25 cubic yards per hour allows operators to match pumping speed precisely to jobsite requirements.
This makes it ideal for:
Structural concrete placement
Grout injection work
3/8-inch shotcrete applications
3/4-inch aggregate concrete pumping
The system is widely used where mobility and compact equipment are essential for efficient jobsite productivity.
Universal Mounting System Advantage
One of the standout features of the RD6536 is its universal skid steer mounting plate, which allows quick attachment to a wide range of skid steer loaders.
This universal design provides:
Fast machine-to-machine compatibility
Reduced setup time on job sites
Improved equipment utilization across fleets
Easy transport and relocation
Combined with forklift pick-up capability, the unit is designed for flexible deployment in both small and large construction projects.
Hydraulic Performance and Output
The RD6536 is powered by a high-efficiency hydraulic system designed for consistent performance under demanding conditions.
Key operating specifications include:
Hydraulic requirement: 18 GPM @ 3000 PSI
Pump pressure: 400 PSI
Output range: 0–25 cubic yards per hour
Pump outlet: 3-inch discharge line
Vertical pumping distance: up to 100 ft
Horizontal pumping distance: up to 250 ft
This performance profile ensures reliable material delivery across varied jobsite conditions.
Durable Squeeze Pump Design
At the core of the RD6536 is a 3-inch hydraulic squeeze pump system designed for durability and minimal maintenance.
Key advantages include:
Primary wear part is a 3-inch rubber pumping tube
Tube replacement takes approximately 20 minutes on-site
No concrete contacts moving mechanical components
Reduced wear and extended machine lifespan
This design significantly lowers downtime and maintenance costs compared to conventional pump systems.
Operator-Friendly Features
The RD6536 is designed with simplicity and jobsite efficiency in mind:
Universal skid steer mounting plate
Manual hydraulic control system for precise operation
Hydraulic remixer in receiving hopper for consistent mix quality
Forklift pick-up compatibility for easy transport
Ability to handle 3/4-inch aggregate mixes
These features make the unit suitable for both experienced operators and general construction crews.
Applications in Construction Projects
The RD6536 Universal Mount Concrete Pump is widely used in:
Infrastructure construction projects
Commercial foundations and slabs
Concrete repair and restoration
Tunnel and underground works
Shotcrete and grout applications
Its versatility makes it a reliable solution for contractors requiring multi-purpose pumping capability.
Technical Specifications
Length: 76 in
Length (with hopper): 89 in
Width: 48 in
Width (with hopper): 55 in
Height: 48.25 in
Charging height: 40.25 in
Weight: 2700 lbs
Output: 25 cubic yards per hour
Pump outlet: 3 in
Hydraulic requirement: 18 GPM @ 3000 PSI
Conclusion
The RD6536 Universal Mount Concrete Pump delivers a strong combination of mobility, durability, and hydraulic efficiency. Its universal skid steer compatibility and low-maintenance squeeze pump design make it a practical choice for contractors seeking a dependable concrete placement solution.
RD6536 Universal Mount Concrete Pump for Skid Steer Applications
