Modern flooring projects require equipment that can efficiently handle material preparation, mixing, and delivery. For contractors working with gypsum-based flooring systems, selecting the right self leveling gypsum pump can help simplify the material placement process.
The Blastcrete D6528 Mixer/Pump is designed for field batching and pumping applications and is a popular solution for gypsum flooring. With a production capacity of up to 12 cubic yards per hour, the D6528 combines a hydraulic spiral mixer, receiving hopper, agitator, and hydraulic squeeze pump in one integrated machine.
For contractors searching for dependable gypsum floor installation equipment, the D6528 provides a practical configuration for moving mixed gypsum flooring material from the batching area to the application location.
What Is a Self Leveling Gypsum Pump?
A self leveling gypsum pump is pumping equipment used to deliver flowable gypsum-based flooring materials to the installation area. These materials are commonly designed to spread and level across a prepared floor surface when properly mixed and installed according to the material manufacturer's requirements.
A mixer/pump such as the D6528 can help streamline this process by combining material mixing and pumping in one machine.
The D6528 begins with a 9 cubic foot hydraulic spiral mixer. Once the material is mixed, the hydraulic system dumps it into a 12 cubic foot receiving hopper. From the hopper, the material is transferred through a 3-inch hydraulic squeeze pump.
The pump provides variable output from 0 to 12 cubic yards per hour, giving operators control over the rate of material delivery.
D6528 for Gypsum Floor Installation
The right gypsum floor installation equipment should provide adequate mixing capacity, consistent material handling, and controlled pumping. The D6528 is configured to bring these functions together in a single field machine.
Its hydraulic mixer prepares the material, while the receiving hopper provides an intermediate material-handling stage before pumping. A hydraulic agitator in the hopper assists with material management as the mixture moves toward the pump.
This integrated design can help contractors organize the workflow between material preparation and floor installation.
How the D6528 Supports Floor Installation
The D6528 uses a straightforward sequence for field batching and pumping:
1. Mix the Material
The 9 cubic foot hydraulic spiral mixer is used to prepare the gypsum flooring material. The mixer includes a hydraulic dump system and a clean-out door.
2. Transfer to the Hopper
After mixing, the material is hydraulically dumped into the 12 cubic foot receiving hopper.
3. Manage Material Flow
A hydraulic agitator in the receiving hopper helps manage the material before it enters the pump.
4. Pump to the Installation Area
The 3-inch hydraulic squeeze pump transfers the material from the hopper to the application area.
5. Adjust Pumping Output
The pump can operate at variable speeds from 0 to 12 cubic yards per hour, allowing operators to adjust material delivery based on project requirements.
Main Features of the D6528
The D6528 includes several features intended for demanding field applications.
9 Cubic Foot Hydraulic Spiral Mixer
The machine uses a 9 cubic foot hydraulic spiral mixer with a hydraulic dump system. A clean-out door is included to assist with cleaning and routine equipment care.
12 Cubic Foot Receiving Hopper
The 12 cubic foot receiving hopper provides additional capacity between mixing and pumping. It also includes a hydraulic agitator for material management.
3-Inch Hydraulic Squeeze Pump
A simple 3-inch hydraulic squeeze pump handles material delivery from the receiving hopper. The pump is driven by a heavy-duty planetary gearbox and provides variable output up to 12 cubic yards per hour.
Durable Pumping Tubes
The D6528 is designed with long-lasting pumping tubes intended to support extended equipment service and reliable pumping operation.
D6528 Specifications
Specification D6528
Length 204 inches
Width 88 inches
Water Tank Height 89 inches
Mixer Height — Dump Position 86 inches
Charging Height 48 inches
Output Capacity 0–12 cubic yards per hour
Mixer Capacity 9 cubic feet
Receiving Hopper Capacity 12 cubic feet
Pump 3-inch hydraulic squeeze pump
These specifications can help contractors evaluate the D6528 in relation to transportation, job-site access, production requirements, and installation planning.
Power Choices for Gypsum Flooring Equipment
The D6528 is available with diesel or electric power options.
Kubota V1505 Diesel
The diesel configuration uses a Kubota V1505 29 HP water-cooled diesel engine. This provides a field-oriented power option for projects where electrical power is limited or unavailable.
30 HP Electric Motor
The electric version uses a 30 HP electric motor with starter and disconnect. This configuration can be considered for job sites with a suitable electrical supply.
The availability of two power configurations allows contractors to select equipment according to their operating environment.
Available Options
The D6528 can be equipped with several optional features:
Pendant or wireless remote
150-gallon water tank with 2-inch flow meter
Mounted spare tire
Hydraulic pressure washer
Dual axles
Mounted air compressor
These options can provide additional flexibility when preparing the equipment for different project conditions.
Choosing Gypsum Floor Installation Equipment
When evaluating gypsum floor installation equipment, contractors should consider more than just pump output. The complete material-handling process can affect productivity and equipment usability.
Important considerations include:
Required material production rate
Mixer capacity
Pump capacity
Pumping distance and configuration
Available power
Job-site accessibility
Equipment cleaning and maintenance requirements
Required accessories and options
The D6528 combines mixing and pumping functions, allowing contractors to manage several of these requirements through one integrated machine.
Advantages of an Integrated Mixer/Pump
A combined mixer and pump can simplify job-site logistics. Rather than moving mixed material between separate pieces of equipment, the D6528 provides a continuous equipment path from mixing to pumping.
The 9 cubic foot mixer handles field batching, while the 12 cubic foot receiving hopper provides material capacity before the pumping stage. The variable-speed squeeze pump then delivers the material toward the installation area.
This configuration can be especially useful for contractors performing gypsum flooring work where organized material delivery is important.
Using the D6528 for Gypsum Flooring Projects
The D6528 is described as a popular solution for gypsum flooring applications. Its combination of hydraulic mixing and pumping makes it suitable for contractors who need field batching and material delivery capabilities.
Actual installation procedures, mix proportions, pumping distances, and application requirements should always be determined according to the gypsum material manufacturer's specifications and the conditions of the individual project.
Proper equipment setup, cleaning, and maintenance are also important for dependable operation.
D6528: A Practical Choice for Gypsum Floor Installation
For contractors looking for a self leveling gypsum pump or complete gypsum floor installation equipment, the D6528 provides a combined mixing and pumping solution.
The machine's 9 cubic foot hydraulic spiral mixer, 12 cubic foot receiving hopper, and 3-inch hydraulic squeeze pump work together to support field batching and material delivery. Its variable pumping capacity of up to 12 cubic yards per hour provides flexibility for different flooring applications.
The available diesel and electric power configurations, along with optional accessories such as a wireless remote, water tank, hydraulic pressure washer, and air compressor, allow the equipment to be configured for different operating requirements.
D6528 Self Leveling Gypsum Pump for Professional Floor Installation
