Choosing the right refractory mixing equipment is essential for contractors and industrial operators working with refractory castables, furnace linings, kiln repairs, and other demanding applications. Efficient mixing and consistent material placement can directly affect productivity, material handling, and installation quality.
The Blastcrete MX-20CM is an integrated mixer and pump designed to combine continuous high-shear mixing with high-pressure material pumping. With a stated output of up to 25 tons per hour, the MX-20CM is designed for both smaller refractory installations and high-volume industrial projects.
Advanced Refractory Mixing Equipment
The MX-20CM incorporates a compact two-stage mixing system designed to improve material preparation before pumping.
The primary mixer is a high-shear continuous mixer where material is hydrated. A secondary medium-shear mixer is mounted in the receiving hopper of the 4-inch high-pressure swing tube pump.
This two-stage configuration provides continuous material processing and helps prepare refractory material for pumping and placement.
The mixer has a stated output of 0–25 tons per hour, giving operators flexibility for different project requirements.
Refractory Placement Equipment for Industrial Applications
The MX-20CM refractory placement equipment is designed for applications where refractory materials need to be efficiently mixed and transported to the installation point.
Typical applications can include:
Furnace refractory installation
Kiln lining and repair
Boiler refractory applications
Steel plant maintenance
Cement plant refractory work
Foundry applications
Industrial furnace repair
Refractory pump casting
Castable placement
Shotcrete applications
High-volume refractory installation
Industrial refractory maintenance
By combining mixing and pumping in one machine, the MX-20CM provides an integrated approach to refractory material placement.
4-Inch High-Pressure Swing Tube Pump
A key component of the MX-20CM refractory mixing equipment is its 4-inch x 36-inch ultra-high-pressure swing tube piston pump.
The pump provides:
Up to 25 tons/hour pumping capacity
2,200 PSI piston face pressure
4-inch x 36-inch swing tube design
Heavy-duty pumping capability
Suitability for refractory pump-cast applications
Shotcrete application capability
The oversized differential cylinders allow the pump to achieve high discharge pressure while requiring comparatively lower hydraulic pressure to operate.
Efficient Two-Stage Mixing and Pumping
The MX-20CM is designed around an efficient relationship between mixing and pumping.
The primary high-shear mixer hydrates the material, while the secondary mixer located in the receiving hopper helps maintain material preparation before pumping.
This configuration can provide a continuous workflow:
Material Charging → High-Shear Mixing → Secondary Mixing → Receiving Hopper → High-Pressure Pumping → Refractory Placement
For high-volume refractory projects, an integrated process can help reduce unnecessary material handling and support consistent production.
Easy Cleaning and Maintenance
Jobsite maintenance is an important consideration when selecting refractory placement equipment.
The MX-20CM features a swing-out receiving hopper that provides access to the swing tube pump section. This design is intended to make cleaning and routine maintenance easier.
The continuous mixer is also designed to reduce dust during charging and minimize cleanup time and material waste.
Additional features such as forklift tubing on the lower hopper can assist with flat-pack removal, while an optional automatic lubrication system can further support maintenance requirements.
Compact and Transportable Design
The MX-20CM has a towing weight of approximately 7,500 pounds and is configured with dual 6,000-pound-capacity axles, electric brakes, and lights.
Its four-point crane pickup allows the machine to be lifted without requiring a spreader bar.
The equipment is also designed so that no special license is required to tow it according to the supplied specifications, although users should always verify applicable local transportation regulations.
MX-20CM Specifications
Specification MX-20CM
Pump 4" x 36" Ultra High Pressure Swing Tube Pump
Pump Output 0–25 tons/hour
Piston Face Pressure 2,200 PSI
Mixer High-Shear Continuous Mixer
Mixer Output 0–25 tons/hour
Dry Hopper 3,000 lb capacity
Receiving Hopper 1,500 lb capacity
Hopper Agitator Hydraulic
Flow Meter 0–20 gallons
Crane Pickup Four-point pickup
Trailer Axles Dual 6,000 lb capacity
Dimensions 220" x 89" x 108"
Weight 7,500 lb
Certification CE
MX-20CM Power Options
The Blastcrete MX-20CM can be configured with different power options depending on project requirements.
Available options include:
99 HP John Deere water-cooled diesel
102 HP Deutz water-cooled diesel
Dual electric motors
The approximately 100 HP power requirement is part of the machine's efficiency-focused design.
Available Equipment Options
Operators can configure the MX-20CM with several additional options:
2,000 PSI hydraulic pressure washer
Vogel automatic lubrication system
Mounted spare tire
Pendant remote control
Skid-mounted configuration
Forklift tubing
These options can improve convenience for cleaning, maintenance, transportation, and different jobsite configurations.
Benefits of MX-20CM Refractory Placement Equipment
The MX-20CM brings several functions together in one machine, making it a versatile option for refractory contractors and industrial maintenance teams.
High Production Capacity
With mixer and pump output rated up to 25 tons per hour, the MX-20CM can support demanding high-volume installations.
Flexible Production
The machine can also be used for smaller installations, making it suitable for projects requiring lower material output.
Integrated Mixing and Pumping
Combining mixing and pumping equipment helps simplify material handling and creates a continuous process from material preparation to placement.
High-Pressure Pumping
The 4-inch swing tube piston pump provides the pressure and capacity required for demanding refractory and shotcrete applications.
Maintenance Accessibility
The swing-out receiving hopper provides easier access to the pump section for cleaning and servicing.
Why MX-20CM Is a Practical Choice for Refractory Projects
For companies searching for dependable refractory mixing equipment and refractory placement equipment, the MX-20CM offers an integrated solution focused on productivity, pumping capacity, and ease of maintenance.
Its two-stage high-shear mixing system, 4-inch swing tube piston pump, 2,200 PSI piston face pressure, and up to 25-ton-per-hour output make it suitable for a wide range of industrial refractory applications.
Whether the project involves furnace maintenance, kiln repair, castable installation, or high-volume refractory placement, the MX-20CM mixer/pump provides a combination of continuous mixing and high-pressure pumping in one transportable system.
Refractory Mixing Equipment and Placement Equipment: MX-20CM
