Industrial refractory projects demand equipment that can efficiently mix, pump, and place refractory materials in challenging environments. The Blastcrete MX-20CM is an integrated mixer and pump designed to support refractory installation and casting applications, combining a high-shear continuous mixer with a high-pressure swing tube piston pump.
As a refractory installation machine, the MX-20CM can be used for both smaller refractory projects of approximately 2–3 tons per hour and high-volume installations of up to 25 tons per hour.
What Is a Refractory Installation Machine?
A refractory installation machine is designed to help contractors and industrial maintenance teams prepare and place refractory materials used in furnaces, kilns, boilers, and other high-temperature industrial equipment.
The MX-20CM integrates material mixing and pumping into one system. Its two-stage mixing arrangement prepares the material before it reaches the high-pressure pump.
The operating process can be summarized as:
Material Charging → High-Shear Mixing → Secondary Mixing → Receiving Hopper → Pumping → Refractory Installation
This integrated configuration is designed to provide continuous material processing and efficient placement.
MX-20CM Refractory Installation Machine
The MX-20CM refractory installation machine combines a high-shear continuous mixer with a 4-inch high-pressure swing tube piston pump.
The machine is designed for applications requiring controlled material placement as well as high-volume production.
Key capabilities include:
Mixer output up to 25 tons/hour
Pump output up to 25 tons/hour
4-inch x 36-inch swing tube piston pump
2,200 PSI piston face pressure
Two-stage mixing system
3,000 lb dry hopper
1,500 lb receiving hopper
Hydraulic receiving hopper agitator
These features make the MX-20CM suitable for a range of refractory installation and casting requirements.
Refractory Casting Equipment for Industrial Applications
Refractory casting equipment is used to prepare and place refractory castables and related materials in industrial structures exposed to high temperatures.
The MX-20CM can be used for applications such as:
Furnace refractory installation
Furnace lining and repair
Kiln lining
Cement plant refractory maintenance
Steel plant applications
Boiler refractory installation
Foundry applications
Industrial furnace repair
Refractory castable placement
Pump-cast refractory installation
Shotcrete applications
High-volume refractory repair
The machine's variable production capability allows it to be considered for both smaller maintenance jobs and larger industrial projects.
Two-Stage Mixing System
One of the important features of the MX-20CM is its two-stage mixing process.
High-Shear Primary Mixer
The compact primary mixer is a high-shear continuous mixer designed to hydrate and prepare the material.
The mixer has a stated output capacity of up to 25 tons per hour.
Secondary Mixer
A medium-shear secondary mixer is mounted in the receiving hopper of the pump.
This provides an additional stage of material processing before the material enters the high-pressure pumping system.
The two-stage arrangement helps create a continuous workflow from material preparation to final placement.
4-Inch Swing Tube Piston Pump
The MX-20CM uses a 4-inch x 36-inch ultra-high-pressure swing tube piston pump.
The pump provides:
0–25 tons/hour output
2,200 PSI piston face pressure
4-inch x 36-inch swing tube
Oversized differential cylinders
Hydraulic receiving hopper agitator
Swing-out receiving hopper
The pump is designed for rugged refractory pump-cast and shotcrete applications.
The oversized differential cylinders allow the pump to achieve high discharge pressure while operating with comparatively lower hydraulic pressure.
Efficient Refractory Material Placement
The MX-20CM is designed to combine mixing and pumping in one machine rather than relying on separate conventional systems.
The material moves from the dry hopper through the high-shear mixer and secondary mixer before entering the receiving hopper and pump.
This integrated process can help:
Reduce material handling
Support continuous production
Simplify jobsite operations
Improve equipment utilization
Reduce unnecessary transfer between machines
For large refractory projects, an integrated refractory installation machine can help simplify the material placement workflow.
Swing-Out Hopper for Maintenance
Industrial refractory equipment must be accessible for routine cleaning and maintenance.
The MX-20CM features a swing-out receiving hopper that provides access to the swing tube section of the pump.
This can make routine:
Cleaning
Inspection
Servicing
Material removal
Swing tube maintenance
more convenient.
The lower hopper also incorporates forklift tubing for flat-pack removal.
Reduced Dust and Cleanup
The continuous mixer is designed to minimize dust generated during charging. The equipment is also designed to support faster mixer cleanup and reduce material waste.
These features can be particularly useful for contractors working on projects where frequent equipment cleaning and material changes are required.
MX-20CM Power Options
The refractory casting equipment can be supplied with different power configurations.
Available options include:
99 HP John Deere water-cooled diesel
102 HP Deutz water-cooled diesel
Dual electric motors
The two-stage mixing and pumping system is designed to operate with approximately 100 HP.
The supplied manufacturer information states that the machine can reduce fuel consumption by up to 50% compared with competitive equipment. Actual fuel consumption will vary according to operating conditions, material, workload, and configuration.
MX-20CM Specifications
Specification MX-20CM
Pump 4" x 36" Ultra High Pressure Swing Tube Pump
Pump Output 0–25 tons/hour
Piston Face Pressure 2,200 PSI
Mixer High-Shear Continuous Mixer
Mixer Output 0–25 tons/hour
Dry Hopper 3,000 lb capacity
Receiving Hopper 1,500 lb capacity
Hopper Agitator Hydraulic
Flow Meter 0–20 gallons
Crane Pickup Four-point pickup
Trailer Axles Dual 6,000 lb capacity
Dimensions 220" x 89" x 108"
Weight 7,500 lb
Certification CE
Main Features of the MX-20CM
The Blastcrete MX-20CM refractory installation machine includes:
High-shear continuous mixer
Two-stage mixing process
Up to 25 tons/hour mixer output
Up to 25 tons/hour pump output
4-inch x 36-inch swing tube piston pump
2,200 PSI piston face pressure
Swing-out receiving hopper
Hydraulic hopper agitator
0–20 gallon flow meter
Solid-state electronic controls
Four-point crane pickup
Dual 6,000 lb trailer axles
Electric braking and lights
CE certification
Optional Features
Additional equipment options include:
2,000 PSI hydraulic pressure washer
Vogel automatic lubrication system
Mounted spare tire
Pendant remote control
Skid-mounted configuration
Forklift tubing
These options allow users to configure the machine according to specific maintenance, transportation, and jobsite requirements.
Transport and Handling
The MX-20CM has a stated towing weight of approximately 7,500 pounds.
Its trailer uses dual 6,000-pound-capacity axles with electric braking and lights. A four-point crane pickup is provided and does not require a spreader bar.
The supplied specifications state that no special license is required to tow the equipment. Users should verify applicable local towing, road, and licensing regulations before transporting the machine.
Benefits of MX-20CM Refractory Casting Equipment
The MX-20CM provides several features that can benefit industrial refractory contractors.
High Production Capacity
The mixer and pump are both rated for output up to 25 tons per hour.
Integrated System
Mixing and pumping are combined into one machine, reducing the need for separate equipment.
High-Pressure Pumping
The 4-inch swing tube piston pump provides 2,200 PSI piston face pressure.
Flexible Project Size
The equipment can support smaller refractory installations as well as high-volume projects.
Maintenance Accessibility
The swing-out hopper provides easier access to the pump section.
Multiple Power Options
Diesel and electric configurations are available for different operating environments.
Why Choose the MX-20CM?
For companies looking for refractory installation machines and refractory casting equipment, the MX-20CM offers a combined mixing and pumping solution designed for demanding industrial applications.
Its high-shear continuous mixer prepares the material, the secondary mixer provides additional processing, and the 4-inch swing tube pump delivers the material under high pressure.
With a stated maximum production capacity of 25 tons per hour, the MX-20CM provides flexibility for refractory installation, pump casting, and shotcrete projects.
The Blastcrete MX-20CM is an integrated mixer and pump designed for efficient refractory material preparation and placement.
For furnace lining, kiln maintenance, boiler applications, steel plants, cement facilities, foundries, and other industrial environments, the MX-20CM refractory installation machine provides continuous mixing and high-pressure pumping in one transportable system.
Its two-stage mixing design, 4-inch swing tube piston pump, 2,200 PSI piston face pressure, multiple power options, and maintenance-friendly receiving hopper make it a versatile choice for demanding refractory projects.
For pricing, technical information, and configuration details, request a quotation or review the available MX-20CM brochure.
Refractory Installation Machine and Casting Equipment: MX-20CM
