Finding the right refractory mixer pump for sale is important for industrial contractors handling refractory installation, furnace lining, kiln repair, and shotcrete applications. The MX-20CM combines a high-shear continuous mixer with a powerful swing tube piston pump, providing an integrated solution for mixing, hydrating, and placing refractory materials.
Designed for both smaller installations and high-volume operations, the MX-20CM can deliver up to 25 tons per hour while providing a piston face pressure of 2,200 PSI.
MX-20CM Refractory Mixer Pump
The MX-20CM uses a compact two-stage mixing system. The primary high-shear continuous mixer hydrates the material, while a secondary medium-shear mixer is positioned in the receiving hopper of the 4-inch high-pressure swing tube pump.
This integrated design allows mixing and pumping to take place continuously, making the machine suitable for projects where consistent material preparation and delivery are essential.
For companies searching for a refractory pump for sale, the MX-20CM offers a combination of high production capacity, high-pressure pumping, and convenient maintenance features.
High-Output Refractory Pump for Industrial Applications
The MX-20CM is capable of handling applications ranging from approximately 2–3 tons per hour for smaller refractory installations to a maximum output of 25 tons per hour for high-volume work.
Potential applications include:
Refractory installation
Furnace lining
Kiln lining and repair
Industrial refractory maintenance
Refractory casting
Pump casting
Shotcrete applications
High-volume refractory placement
4-Inch Swing Tube Piston Pump
At the center of the MX-20CM is a 4" x 36" ultra high-pressure swing tube piston pump. The pump provides 2,200 PSI piston face pressure for demanding refractory pump cast and shotcrete applications.
Oversized differential cylinders allow the pump to maintain high discharge pressure while operating with comparatively lower hydraulic pressure.
Pump Specifications
Specification MX-20CM
Pump Type Ultra High Pressure Swing Tube Pump
Pump Size 4" x 36"
Pump Output 0–25 tons/hour
Piston Face Pressure 2,200 PSI
Mixer Type High Shear Continuous Mixer
Mixer Output 0–25 tons/hour
Dry Hopper 3,000 lb.
Receiving Hopper 1,500 lb.
Hydraulic Agitator Included
Flow Meter 0–20 gallons
High-Shear Continuous Mixer
The primary high-shear continuous mixer is designed to hydrate material efficiently before it reaches the secondary mixing stage.
The two-stage system can help reduce cleanup time and material waste. The manufacturer also states that dust generated during charging of the continuous mixer is substantially reduced.
With a mixer output of up to 25 tons per hour, the MX-20CM can support high-capacity refractory placement projects without requiring a separate standalone mixer.
Easy Cleaning and Maintenance
The MX-20CM features a swing-out receiving hopper that provides easier access to the swing tube section for cleaning and maintenance.
Additional equipment-handling features include:
Forklift tubing for flat-pack removal
Four-point crane pickup
No spreader bar required for crane pickup
Solid-state electronic controls
Electric-braked trailer
CE certification
These features are designed to make the machine easier to service and handle in demanding industrial environments.
Power Options
Customers looking for a refractory mixer pump for sale can select from several MX-20CM power configurations:
99 HP John Deere water-cooled diesel
102 HP Deutz water-cooled diesel
Dual electric motors
The machine is designed around approximately 100 HP. According to the supplied manufacturer information, the two-stage mixer and oversized differential design can lower fuel consumption by up to 50% compared with competitive machines.
MX-20CM Dimensions and Capacity
The MX-20CM has a towing weight of 7,500 pounds and dimensions of 220" x 89" x 108". Its trailer uses dual 6,000-pound-capacity axles with electric braking and lights.
The dry hopper provides 3,000 lb. capacity, while the receiving hopper has 1,500 lb. capacity with a hydraulic agitator.
Available MX-20CM Options
Additional options are available to configure the machine for specific project requirements:
2,000 PSI hydraulic pressure washer
Vogel automatic lubrication system
Spare tire
Pendant remote
Skid mounting with forklift tubing
The MX-20CM is designed to combine material mixing and high-pressure pumping into one integrated refractory placement machine. Its 25-ton-per-hour maximum output, 2,200 PSI piston face pressure, and high-shear continuous mixer make it suitable for both smaller refractory projects and demanding industrial installations.
If you are researching a refractory mixer pump for sale or refractory pump for sale, the MX-20CM provides a high-capacity option with integrated mixing, pumping, and material-handling features.
Refractory Mixer Pump for Sale: MX-20CM High-Performance Mixing and Pumping System
