Selecting dependable equipment is essential for refractory installation, pump casting, and shotcrete applications. The Blastcrete MX-20CM Mixer/Pump combines a high-shear continuous mixer with a 4-inch high-pressure swing-tube piston pump, providing an integrated solution for material mixing and placement.
For companies evaluating a refractory equipment supplier or searching for a capable refractory pump manufacturer, the MX-20CM offers high production capacity, strong pumping pressure, convenient maintenance access, and flexible power options.
MX-20CM for Refractory Material Placement
The MX-20CM is designed for refractory placement ranging from smaller projects of approximately 2–3 tons per hour to high-volume applications reaching 25 tons per hour.
Its compact two-stage mixing arrangement includes a high-shear primary continuous mixer where material is hydrated, followed by a medium-shear secondary mixer mounted in the receiving hopper.
This configuration integrates mixing and pumping into a single machine, helping simplify refractory material handling at the jobsite.
High-Pressure Refractory Pump System
The MX-20CM uses a 4-inch x 36-inch ultra-high-pressure swing-tube piston pump with a stated piston-face pressure of 2,200 PSI.
The oversized differential cylinders are designed to provide strong discharge performance while requiring lower hydraulic operating pressure. The pump is intended for rugged refractory pump-cast and shotcrete applications.
With a rated output of 0–25 tons per hour, the machine can be configured for both moderate and high-volume material placement requirements.
High-Shear Continuous Mixer
A major feature of the MX-20CM is its high-shear continuous mixer, which is capable of output up to 25 tons per hour.
The two-stage system provides:
High-shear primary continuous mixing
Material hydration during the primary mixing stage
Medium-shear secondary mixing
Hydraulic agitation in the receiving hopper
Reduced dust during mixer charging
Faster mixer cleanup
Low material waste during cleanup
For a refractory equipment supplier, these features make the MX-20CM a versatile option for customers requiring integrated mixing and pumping capabilities.
Easy Access for Maintenance
Equipment used in refractory applications must be practical to clean and service. The MX-20CM features a swing-out receiving hopper, providing easier access to the swing-tube section for cleaning and maintenance.
Forklift tubing is mounted to the lower hopper for convenient flat-pack removal, while the four-point crane pickup allows the machine to be lifted without a spreader bar.
These design features can help simplify routine jobsite handling and servicing.
MX-20CM Technical Specifications
Specification MX-20CM
Pump 4" x 36" Ultra High Pressure Swing Tube Pump
Pump Output 0–25 tons/hour
Piston Face Pressure 2,200 PSI
Mixer High-Shear Continuous Mixer
Mixer Output 0–25 tons/hour
Dry Hopper 3,000 lb. capacity
Receiving Hopper 1,500 lb. with hydraulic agitator
Crane Pickup Four-point pickup
Trailer Dual 6,000 lb. capacity axles
Dimensions 220" x 89" x 108"
Weight 7,500 lb.
Certification CE
Power Options
The MX-20CM is available with several power configurations:
99 HP John Deere water-cooled diesel
102 HP Deutz water-cooled diesel
Dual electric motors
The manufacturer states that the two-stage mixer and oversized differential-cylinder design allows the machine to operate with approximately 100 HP and reduces fuel consumption compared with competitive machines.
Optional Features
Depending on project requirements, the MX-20CM can be equipped with:
2,000 PSI hydraulic pressure washer
Vogel automatic lubrication system
Spare tire
Pendant remote
Skid mounting with forklift tubing
These options provide additional flexibility for maintenance, transportation, and jobsite operation.
Choosing a Refractory Pump Manufacturer
When evaluating a refractory pump manufacturer, buyers should consider pump pressure, material output, mixing performance, maintenance requirements, transportation, and available power configurations.
The MX-20CM addresses these requirements by combining a continuous high-shear mixer with a high-pressure swing-tube piston pump. Its 25-ton-per-hour maximum output makes it suitable for high-volume refractory applications while its lower production range allows it to be used for smaller installations.
Refractory Equipment Supplier for Industrial Applications
A reliable refractory equipment supplier can help contractors and industrial operators identify equipment suited to their material placement requirements. The MX-20CM provides a single-platform solution for mixing, hydrating, and pumping refractory materials.
Its combination of high-shear mixing, 2,200 PSI piston-face pressure, swing-tube pumping, and service-friendly access makes it a practical option for demanding refractory and shotcrete work.
Request Information About the MX-20CM
For pricing, availability, and additional product information, use the following resources:
Request a Quote
Download the MX-20CM Brochure
Conclusion
The Blastcrete MX-20CM Mixer/Pump brings together continuous high-shear mixing and high-pressure pumping in one mobile machine. With output of up to 25 tons per hour, a 4-inch x 36-inch swing-tube piston pump, and 2,200 PSI piston-face pressure, it is designed for demanding refractory placement and shotcrete applications.
Refractory Equipment Supplier: MX-20CM Refractory Pump Manufacturer Solution
