Refractory installation projects often require equipment that can combine high production capacity with mobility and dependable pumping performance. The Blastcrete MX-20CM Mixer/Pump is designed to provide continuous mixing and high-pressure pumping in a compact, transportable package.
For contractors looking for a portable refractory mixer pump or trailer mounted refractory pump, the MX-20CM offers a combination of continuous high-shear mixing, a 4-inch swing tube piston pump, and trailer-mounted mobility.
What Makes the MX-20CM a Portable Refractory Mixer Pump?
The MX-20CM is designed for both smaller refractory installations of approximately 2–3 tons per hour and high-volume applications reaching up to 25 tons per hour.
Its trailer configuration has dual 6,000-pound-capacity axles with electric brakes and lights, while the overall machine weight is approximately 7,500 pounds. This design allows the equipment to be transported between suitable job locations without requiring a separate stationary installation.
The machine also provides four-point crane pickup, with no spreader bar required, helping simplify lifting and positioning at the worksite.
Trailer Mounted Refractory Pump for Flexible Jobsite Operation
A trailer mounted refractory pump can be particularly useful when refractory installation equipment needs to move between different work areas or projects.
The MX-20CM combines the mixer and pump into one machine, reducing the need to coordinate separate mixing and pumping equipment. Its forklift tubing can also assist with flat-pack removal from the lower hopper.
The machine is available with several power configurations, including:
99 HP John Deere water-cooled diesel
102 HP Deutz water-cooled diesel
Dual electric motors
This gives users options based on their site requirements and available power infrastructure.
High-Shear Continuous Mixing System
The MX-20CM uses a compact two-stage mixing process. The primary high-shear continuous mixer hydrates the refractory material before it enters the secondary mixer mounted in the receiving hopper.
The mixer has a rated output of 0–25 tons per hour, matching the pump's maximum rated output. This allows the mixing and pumping systems to support high-volume refractory placement without relying on conventional batch mixing.
The supplied product information also states that the continuous mixing design helps minimize dust generated during charging and can simplify cleanup while reducing material waste.
4-Inch High-Pressure Swing Tube Pump
The MX-20CM features a 4-inch x 36-inch ultra-high-pressure swing tube piston pump. The pump is designed for rugged refractory pumping and shotcrete applications.
Key pump specifications include:
Pump output: 0–25 tons per hour
Piston face pressure: 2,200 PSI
Pump type: Ultra-high-pressure swing tube piston pump
Receiving hopper capacity: 1,500 pounds
Hydraulic agitator in receiving hopper
Oversized differential cylinders allow the pump to operate with lower hydraulic pressure while maintaining high discharge pressure.
Easy Access for Cleaning and Maintenance
Refractory equipment requires practical maintenance access because residual material can become difficult to remove after installation work.
The MX-20CM incorporates a swing-out receiving hopper, providing easier access to the swing tube section for cleaning and servicing. This can help reduce maintenance time between jobs.
Optional equipment includes a 2,000 PSI hydraulic pressure washer and Vogel automatic lubrication system for additional maintenance support.
Portable Design Without Sacrificing Production
Portability does not mean sacrificing production capacity with the MX-20CM. The machine can operate from low-volume refractory work through applications requiring up to 25 tons per hour.
Its specifications include:
Specification MX-20CM
Pump 4" x 36" Ultra High Pressure Swing Tube
Pump Output 0–25 tons/hour
Piston Face Pressure 2,200 PSI
Mixer High-Shear Continuous Mixer
Mixer Output 0–25 tons/hour
Dry Hopper 3,000 lb.
Receiving Hopper 1,500 lb.
Dimensions 220" x 89" x 108"
Weight 7,500 lb.
Trailer Dual 6,000 lb. axles
Power Diesel or dual electric motors
Applications for the MX-20CM
The MX-20CM is designed for demanding refractory placement and can also be used for shotcrete applications. Its continuous mixer and high-pressure piston pump make it suitable for projects where consistent material preparation and controlled delivery are important.
Potential applications include refractory installation, refractory pump casting, furnace-related work, and other industrial projects requiring pumped refractory materials.
Why Choose a Trailer Mounted Refractory Pump?
A trailer-mounted configuration can provide several practical benefits:
Easier transportation between job locations
Integrated mixer and pump system
High production capacity
Diesel or electric power options
Crane pickup capability
Forklift access for equipment handling
Swing-out hopper for maintenance
Reduced need for separate mixing equipment
Portable Refractory Mixer Pump: MX-20CM Trailer-Mounted Solution for Refractory Applications
