Choosing the right concrete pumping machine supplier is important for contractors and construction companies that need dependable pumping equipment for concrete repair, block fill, epoxy, plaster, stucco, and other compatible materials.
The D3522 Pump is a compact 2-inch hydraulic squeeze pump designed for a range of construction and repair applications. With variable output from 0 to 6 cubic yards per hour and pumping pressure up to 400 PSI, the D3522 provides a flexible solution for projects that require controlled material pumping.
D3522 Pump from a Concrete Pumping Machine Supplier
The D3522 is a compact hydraulic pumping machine driven by a heavy-duty planetary gearbox. It features a 2-inch D3522 hydraulic squeeze pump, a 6 cubic foot receiving hopper, and a 2-inch HD discharge.
For contractors searching for an industrial concrete pump supplier, the D3522 offers a combination of variable-speed operation, multiple power options, and trailer or skid-mounted configurations.
The machine can be configured according to the requirements of the project and operating environment.
Why Choose the D3522 Pump?
The D3522 is designed to provide controlled pumping of suitable construction and repair materials.
Important features include:
2-inch hydraulic squeeze pump
Variable output from 0–6 cubic yards per hour
Pumping pressure up to 400 PSI
6 cubic foot receiving hopper
Trailer-mounted configuration
Lower-profile skid-mounted configuration
Multiple power options
Optional accessories for different job-site requirements
Industrial Concrete Pump Supplier: What to Consider
When selecting an industrial concrete pump supplier, contractors should consider the complete equipment package rather than focusing only on the pump itself.
Important factors include:
Equipment Configuration
Determine whether a trailer-mounted or skid-mounted D3522 configuration is appropriate for the application.
Power Source
The D3522 is available with diesel, gasoline, or electric power options.
Pump Capacity
The D3522 provides variable output from 0–6 cubic yards per hour, allowing operators to adjust the pumping rate.
Material Compatibility
Before purchasing, confirm that the intended concrete, repair material, epoxy, block fill, plaster, or stucco material is compatible with the pump.
Equipment Options
Additional accessories may be available to improve the machine's suitability for particular job-site requirements.
D3522 Applications
The D3522 Pump is designed for several applications involving compatible materials.
Concrete Repair
The D3522 can support suitable concrete repair projects where controlled pumping of repair materials is required.
Block Fill
The pump can be used for compatible block fill applications in masonry and construction.
Epoxy Pumping
The D3522 can support appropriate epoxy applications when the specific material meets the pump's compatibility requirements.
Plaster and Stucco
The pump is also designed for various plaster and stucco applications.
D3522 Pump Specifications
Specification Details
Pump 2" D3522 Hydraulic Squeeze Pump
Pumping Pressure 400 PSI
Output 0–6 Cubic Yards Per Hour
Discharge 2" HD
Hopper 6 cu. ft.
Trailer Single 6,000 lb. capacity axle with electric braking and lights
Dimensions 166" × 88" × 54"
Weight 2,800 lbs.
D3522 Power Options
When purchasing through a concrete pumping machine supplier, buyers can select from several power configurations:
Kubota water-cooled diesel
24 HP Honda gasoline engine
10 HP electric motor
The best option depends on the job-site environment, available utilities, transportation requirements, and intended use.
D3522 Pump Options
The D3522 can be configured with several additional options:
Hydraulic receiving hopper agitator
Pendant or wireless remote
Spare tire mounted
Skid mounted with forklift tubing
Hydraulic pressure washer
Air compressor mounted
These options allow contractors to configure the equipment around specific operating requirements.
Trailer-Mounted D3522
The trailer-mounted configuration provides mobility for contractors who need to transport pumping equipment between job sites.
The supplied specifications include a single 6,000 lb. capacity axle with electric braking and lights.
This configuration can be useful for contractors who need a mobile pumping machine.
Skid-Mounted D3522
A lower-profile skid-mounted configuration is also available. This setup can be useful where a trailer-mounted machine is not preferred.
The skid-mounted option can include forklift tubing for equipment handling and positioning.
Selecting an Industrial Concrete Pump Supplier
Before purchasing an industrial concrete pump, contractors should ask the supplier about:
Current equipment availability
Pump specifications
Available power configurations
Trailer and skid options
Material compatibility
Available accessories
Replacement parts
Service and support
Delivery arrangements
Purchasing and quotation information
Providing the supplier with details about the intended application can help ensure that the selected D3522 configuration matches the project.
D3522 for Construction and Repair Projects
The D3522 provides a compact pumping solution for contractors who need variable-speed material delivery.
Its 2-inch hydraulic squeeze pump, 6 cubic foot hopper, 0–6 cubic yards per hour output, and multiple mounting and power configurations make it suitable for a variety of compatible applications.
For companies searching for a concrete pumping machine supplier or industrial concrete pump supplier, the D3522 can be evaluated based on the project's material, pumping requirements, job-site conditions, and desired configuration.
Concrete Pumping Machine Supplier: Industrial Concrete Pump Supplier for D3522 Pump
