Blastcrete H 020 Hydraulic Gunite Attachment for Controlled Material Output

Blastcrete H 020 Hydraulic Gunite Attachment for Controlled Material Output

The Blastcrete H 020 hydraulic gunite attachment is a simple hydraulic rotary Gunite Machine Attachment designed for contractors who need variable-speed operation and precise material output control. The H 020 provides adjustable production from 0 to 5 cubic yards per hour, making it a practical solution for suitable professional gunite applications.

The machine requires 10 GPM at 1,500 PSI and is universal with any hydraulic power unit capable of providing this capacity. Since the H 020 is hydraulically powered, its minimum air requirement is only 225 CFM.

H 020 Hydraulic Rotary Gunite Machine

The H 020 combines hydraulic rotary operation with a straightforward machine design. Its variable-speed capability allows operators to adjust material output from zero to five cubic yards per hour according to application requirements.

The machine is equipped with the proven Genuine Piccola single-point clamping system and provides precise material output control for consistent machine operation.

Key Features of the H 020

The Blastcrete H 020 includes:

Genuine Piccola Single-Point Clamping System
Precise Material Output Control
Universal Mounting Plate
Forklift Pickup Tubing
Rotor of Your Choice
Variable output from 0–5 cubic yards per hour
Hydraulic requirement of 10 GPM @ 1,500 PSI
Minimum air requirement of 225 CFM
H 020 Specifications
Specification Details
Air Requirement 225 CFM minimum
Output 0–5 cubic yards per hour
Hydraulic Requirement 10 GPM @ 1,500 PSI
Outlet 1.5"
Maximum Aggregate ¾"
Mounting Skid Mount
Estimated Wear Pad Life 200 tons
Dimensions 34" × 34" × 50"
Weight 1,250 lbs.
Variable-Speed Material Output

One of the primary features of the H 020 is its adjustable output range of 0 to 5 cubic yards per hour. This allows operators to regulate material delivery based on project requirements.

The machine provides a 1.5-inch outlet and supports aggregate up to ¾ inch. These specifications should be considered when selecting compatible materials and determining whether the equipment is appropriate for a specific application.

10 GPM at 1,500 PSI Hydraulic Requirement

The H 020 requires 10 GPM at 1,500 PSI hydraulic power. It is universal with any hydraulic power unit capable of supplying these requirements, providing flexibility for contractors with compatible hydraulic equipment.

Before operation, the hydraulic power unit should be checked to ensure that it can consistently provide the required flow and pressure.

225 CFM Minimum Air Requirement

Because the H 020 is hydraulically powered, it requires only 225 CFM minimum air capacity. This provides a clearly defined air requirement when planning the complete gunite equipment system.

Contractors should verify that the supporting air equipment can meet the specified capacity for the intended application.

Proven Piccola Clamping System

The H 020 uses the proven Genuine Piccola single-point clamping system. This simple design provides rotor clamping while supporting the machine's precise material output control.

The rotor of your choice feature also gives contractors flexibility when configuring the Gunite Machine Attachment for their application.

Compact Skid-Mounted Design

The H 020 is skid mounted and measures 34" × 34" × 50", with a weight of approximately 1,250 pounds.

Its universal mounting plate provides installation flexibility, while forklift pickup tubing helps simplify transportation and positioning on the jobsite.

Wear Pad Life and Maintenance

The estimated wear pad life for the H 020 is approximately 200 tons. This figure can be used as a general reference for maintenance planning.

Actual wear life may vary depending on material characteristics, operating conditions, production levels, and equipment maintenance.

Why Choose the Blastcrete H 020?

The Blastcrete H 020 brings together hydraulic rotary technology, variable-speed production, and precise material output control in a practical skid-mounted package.

For contractors considering a Blastcrete H 020 hydraulic gunite attachment, the key specifications include:

0–5 cubic yards per hour output
10 GPM @ 1,500 PSI hydraulic requirement
225 CFM minimum air requirement
1.5-inch outlet
¾-inch maximum aggregate
Genuine Piccola single-point clamping system
Universal mounting plate
Forklift pickup tubing
Rotor selection options
Quote Now or Download the Brochure

Looking for a Blastcrete H 020 hydraulic gunite attachment with variable-speed operation and precise material output control? The H 020 offers a straightforward hydraulic solution for suitable professional gunite applications.