The Blastcrete H 020 is a hydraulic rotary Gunite Machine Attachment designed for controlled material placement in suitable professional applications. With variable-speed output from 0 to 5 cubic yards per hour, the H 020 provides precise material output control that can be valuable when planning hydraulic gunite equipment for structural repair projects.
The machine requires 10 GPM at 1,500 PSI hydraulic power and is universal with any hydraulic power unit capable of supplying this capacity. Because the H 020 is hydraulically powered, its minimum air requirement is 225 CFM.
Gunite Equipment for Structural Repair Applications
Structural repair work can require equipment capable of delivering repair material in a controlled and consistent manner. The H 020 provides variable-speed production and precise material output control, offering contractors flexibility for suitable gunite-based repair applications.
The machine's output range of 0–5 cubic yards per hour allows operators to adjust material delivery according to project requirements.
The suitability of gunite for a particular structural repair should always be determined by the project's engineering specifications, repair system, material requirements, and applicable standards.
Key Features of the Blastcrete H 020
The H 020 includes:
Genuine Piccola Single-Point Clamping System
Precise Material Output Control
Universal Mounting Plate
Forklift Pickup Tubing
Rotor of Your Choice
Variable output from 0–5 cubic yards per hour
Hydraulic requirement of 10 GPM @ 1,500 PSI
Minimum air requirement of 225 CFM
H 020 Specifications
Specification Details
Air Requirement 225 CFM minimum
Output 0–5 cubic yards per hour
Hydraulic Requirement 10 GPM @ 1,500 PSI
Outlet 1.5"
Maximum Aggregate ¾"
Mounting Skid Mount
Estimated Wear Pad Life 200 tons
Dimensions 34" × 34" × 50"
Weight 1,250 lbs.
Precise Material Output Control
The H 020 is designed to provide precise material output control through its variable-speed operation. Operators can adjust production from zero to five cubic yards per hour according to the requirements of the application.
For suitable structural repair projects, controlled material delivery can be an important consideration when placing material onto or against existing concrete surfaces. Actual operating procedures should follow the project's approved repair specifications.
Hydraulic Power Requirements
The H 020 requires 10 GPM at 1,500 PSI hydraulic power and is universal with any hydraulic power unit capable of supplying this capacity.
This makes hydraulic compatibility an important consideration when configuring the equipment. Contractors should verify the flow and pressure capabilities of the hydraulic power unit before operation.
225 CFM Minimum Air Requirement
Because the H 020 is hydraulically powered, it requires only 225 CFM minimum air capacity.
When planning the complete equipment setup, contractors should ensure that the available air system can meet the machine's minimum requirement and that the hydraulic power unit meets the required flow and pressure.
Genuine Piccola Single-Point Clamping System
The H 020 is equipped with the proven Genuine Piccola single-point clamping system. This system provides rotor clamping while supporting the machine's controlled operation.
The machine also offers a rotor of your choice, allowing contractors to configure the Gunite Machine Attachment according to the intended application.
Outlet and Aggregate Capacity
The H 020 features a 1.5-inch outlet and supports aggregate up to ¾ inch. These specifications should be considered when selecting materials and determining equipment compatibility.
The estimated wear pad life is approximately 200 tons. Actual wear life can vary according to material characteristics, operating conditions, production levels, and maintenance practices.
Skid-Mounted Design for Jobsite Handling
The H 020 is skid mounted and measures 34" × 34" × 50", with a weight of approximately 1,250 pounds.
A universal mounting plate provides installation flexibility, while forklift pickup tubing assists with transportation and positioning where appropriate.
Why Consider the H 020 for Structural Repair?
For contractors evaluating hydraulic gunite equipment for structural repair, the H 020 offers a combination of variable-speed production, precise material output control, and hydraulic operation.
Important specifications include:
0–5 cubic yards per hour output
10 GPM @ 1,500 PSI hydraulic requirement
225 CFM minimum air requirement
1.5-inch outlet
¾-inch maximum aggregate
Skid-mounted configuration
Genuine Piccola single-point clamping system
Universal mounting plate
Forklift pickup tubing
Rotor selection options
These features make the H 020 a practical Gunite Machine Attachment for suitable professional applications where controlled material delivery is required.
Quote Now or Download the Brochure
Looking for hydraulic gunite equipment for structural repair applications? The Blastcrete H 020 provides variable-speed hydraulic operation and precise material output control in a compact skid-mounted configuration.
Hydraulic Gunite Equipment for Structural Repair: Blastcrete H 020
