The X-10 forklift mounted concrete pump machine is an ultra-high-pressure swing tube piston pump designed for demanding refractory, cast, and shotcrete applications. Engineered for productivity, reliability, and easy maintenance, the X-10 can deliver material at outputs of up to 12 cubic yards per hour.
With a powerful 2,200 PSI piston face pressure, the X-10 piston pump is designed to move material over demanding pumping distances while maintaining dependable performance. Its practical forklift tubing configuration also makes material handling and flat-pack removal easier on the jobsite.
X-10 Piston Pump for High-Pressure Concrete Applications
The X-10 piston pump combines a heavy-duty swing tube design with an easy-to-maintain receiving hopper. The system is built specifically for contractors working with refractory materials, cast applications, and shotcrete.
The 3-inch x 24-inch ultra-high-pressure swing tube provides the pumping capacity needed for demanding applications. With a maximum piston face pressure of 2,200 PSI, the machine is engineered for high-pressure material placement where conventional pumps may not provide sufficient pumping force.
Forklift Mounted Concrete Pump Machine
A major advantage of the X-10 is its forklift tubing mounted to the lower hopper. This configuration allows operators to use suitable lifting equipment to assist with flat-pack removal and equipment handling.
The forklift tubing can make transportation and positioning more convenient on busy construction and industrial jobsites. It is particularly useful when equipment must be moved around a project area or loaded and unloaded efficiently.
The X-10 can also be configured as a skid-mounted pump with forklift tubing, providing additional flexibility for applications where trailer-mounted equipment is not the preferred setup.
Swing-Out Hopper for Easy Maintenance
The X-10 features a simple swing-out receiving hopper that provides fast access to the swing tube section.
Easy access is important for contractors because regular cleaning and maintenance can help minimize unnecessary downtime. Instead of working around a difficult-to-access pumping system, operators can gain convenient access to the swing tube area for cleaning, inspection, and routine service.
The receiving hopper has a 2,500-pound capacity and incorporates a hydraulic agitator to help maintain consistent material movement toward the pumping system.
2,200 PSI High-Pressure Piston Pump
The X-10 is engineered around a 2,200 PSI piston face pressure. This high-pressure capability allows the pump to handle challenging refractory and shotcrete applications and helps provide the force required for longer material pumping distances.
The combination of high pressure and an output of up to 12 cubic yards per hour makes the X-10 suitable for contractors who need production capacity without sacrificing pumping pressure.
Key Features of the X-10 Forklift Mounted Concrete Pump
2,200 PSI piston face pressure
Output of up to 12 cubic yards per hour
3-inch x 24-inch ultra-high-pressure swing tube
Forklift tubing mounted to the lower hopper
Swing-out receiving hopper for convenient maintenance access
2,500-pound-capacity receiving hopper
Hydraulic hopper agitator
Reliable solid-state electronics
CE certification
Available in diesel and electric configurations
Designed for refractory, cast, and shotcrete applications
Power Options
The X-10 is available with multiple power options to accommodate different jobsite requirements.
Kubota Diesel Engine
The diesel-powered version features a Kubota V3600 66 HP water-cooled diesel engine, providing dependable power for demanding field applications.
40 HP Electric Motor
A 40 HP electric motor configuration is also available for applications where electric power is preferred or readily accessible.
Available Options
The X-10 forklift mounted concrete pump machine can be equipped with several options designed to improve operation, maintenance, and convenience:
2,000 PSI hydraulic pressure washer
Vogel automatic lubrication system
Spare tire mount
Pendant or wireless remote
Skid-mounted configuration with forklift tubing
These options allow contractors to configure the pump according to their specific operating environment and application requirements.
X-10 Piston Pump Specifications
Specification X-10
Pump Type 3-inch x 24-inch Ultra High Pressure Swing Tube
Pump Pressure 2,200 PSI
Output 0–12 Cubic Yards Per Hour
Discharge 3 inches
Hopper 2,500 lb. Capacity Swing-Out Receiving Hopper with Hydraulic Agitator
Operating Platform 22 sq. ft.
Electrical Control Solid-State Valve Control
Trailer Single 6,000 lb. Capacity Axle with Electric Braking and Lights
Dimensions 156 x 76 x 80 inches
Weight 4,500 lbs.
Applications for the X-10 Concrete Pump
The X-10 is designed for applications where reliable high-pressure pumping is essential. Typical applications include:
Refractory pumping
Shotcrete applications
Castable material placement
Industrial refractory projects
High-pressure concrete material placement
Construction projects requiring extended pumping distances
Its high-pressure piston system and hydraulic hopper agitator make it suitable for demanding material-handling environments.
Built for Productivity and Easy Maintenance
The X-10 is designed with both production and maintenance in mind. Its swing-out hopper provides quick access to the swing tube, while the hydraulic agitator supports consistent material feeding.
The forklift tubing mounted to the lower hopper adds another practical advantage by facilitating flat-pack removal and material handling. Combined with solid-state electronics and multiple power configurations, these features make the X-10 a versatile solution for professional contractors.
Fast Return on Investment
Equipment productivity can directly affect project profitability. The X-10 is designed to help contractors maximize production through a combination of high pumping pressure, efficient material handling, and simplified maintenance.
With an output of up to 12 cubic yards per hour and piston face pressure of 2,200 PSI, the X-10 provides the performance required for demanding refractory and shotcrete work.
Its accessible hopper and service-friendly design can also help reduce maintenance-related downtime, supporting a faster return on equipment investment.
Why Choose the X-10 Forklift Mounted Concrete Pump Machine?
The X-10 forklift mounted concrete pump machine is a strong option for contractors who need a high-pressure, production-oriented pumping system with convenient material handling features.
Its 2,200 PSI piston face pressure, 12 cubic yards per hour maximum output, swing-out hopper, hydraulic agitator, and forklift tubing provide a combination of performance and jobsite practicality.
Whether you are handling refractory materials, shotcrete, or other demanding castable applications, the X-10 is designed to deliver dependable high-pressure pumping performance.
Quote Now or Download the X-10 Brochure
Looking for a reliable forklift mounted concrete pump machine for refractory or shotcrete applications?
The X-10 piston pump delivers high-pressure performance, convenient maintenance access, and flexible power and mounting configurations.
Quote Now to discuss your pumping requirements or Download the Brochure to learn more about the X-10 and its available configurations.
SEO Keywords
forklift mounted concrete pump machine
forklift mounted concrete pump
X-10 piston pump
X 10 piston pump
forklift concrete pump machine
high pressure concrete pump
ultra high pressure piston pump
refractory concrete pump
shotcrete piston pump
refractory piston pump
hydraulic concrete pump
swing tube piston pump
2200 PSI concrete pump
high pressure shotcrete pump
forklift mounted pump
industrial concrete pump
refractory pump machine
concrete piston pump
X-10 Forklift Mounted Concrete Pump Machine for Refractory and Shotcrete Applications
