X-10 Solid State Control Piston Pump for High-Pressure Refractory and Shotcrete Applications

The X-10 solid state control piston pump is an ultra-high-pressure swing tube pumping system engineered for demanding refractory, cast, and shotcrete applications. Designed with reliable solid-state electronics, a powerful piston system, and a maintenance-friendly hopper configuration, the X-10 delivers dependable performance with an output of up to 12 cubic yards per hour.

With 2,200 PSI piston face pressure, the X-10 piston pump is built to move material over demanding pumping distances while providing the pressure required for professional refractory and shotcrete applications.

X-10 Piston Pump with Solid State Control

The X-10 combines an ultra-high-pressure piston pumping system with solid state control technology. Its reliable solid-state electronics are designed to provide straightforward and dependable pump operation.

For contractors, reliable controls are important because pumping equipment needs to perform consistently in demanding jobsite conditions. The X-10's solid-state control system works together with its heavy-duty pumping components to provide a practical solution for high-pressure material placement.

2,200 PSI Piston Face Pressure

One of the most important performance features of the X-10 is its 2,200 PSI piston face pressure.

This high piston pressure is designed for rugged refractory, cast, and shotcrete applications where material may need to be pumped over significant distances. Combined with an output of up to 12 cubic yards per hour, the X-10 provides both high pressure and production capacity.

The result is a pump designed for contractors who require dependable performance in demanding pumping environments.

Swing Tube Piston Pump Design

The X-10 uses a 3-inch x 24-inch ultra-high-pressure swing tube pumping system. The swing tube design is engineered for heavy-duty pumping applications and is supported by a receiving hopper with hydraulic agitation.

The system is designed to provide consistent material movement while maintaining convenient access for routine cleaning and maintenance.

Swing-Out Hopper for Easy Maintenance

The X-10 features a simple swing-out receiving hopper that allows operators to access the swing tube section quickly.

Easy access can make a significant difference during daily equipment maintenance. Operators can more conveniently clean, inspect, and service the swing tube section, helping minimize unnecessary downtime.

The receiving hopper has a 2,500-pound capacity and includes a hydraulic agitator to help maintain material flow toward the pump.

Reliable Solid State Electronics

The solid state control piston pump design of the X-10 incorporates reliable solid-state electronics for pump control.

Solid-state controls are an important feature for contractors looking for straightforward equipment operation and dependable electrical control. The X-10 is designed to combine these controls with a rugged mechanical pumping system for demanding industrial and construction applications.

The machine also carries CE certification, making it suitable for markets and applications where CE-certified equipment is required.

Key Features of the X-10 Piston Pump

2,200 PSI piston face pressure

Output up to 12 cubic yards per hour

3-inch x 24-inch ultra-high-pressure swing tube

Reliable solid-state electronics

Swing-out receiving hopper

Hydraulic hopper agitator

2,500-pound hopper capacity

Forklift tubing mounted to the lower hopper

Easy flat-pack removal

CE certification

Diesel and electric power options

Designed for refractory, cast, and shotcrete applications

Power Options

The X-10 solid state control piston pump is available with two primary power configurations.

Kubota V3600 Diesel

The diesel-powered model uses a Kubota V3600 66 HP water-cooled diesel engine, providing a powerful field-ready configuration for demanding pumping applications.

40 HP Electric Motor

A 40 HP electric motor option is also available for applications where electric power is preferred.

These power choices provide contractors with flexibility when selecting the right configuration for their project and jobsite conditions.

Available Options

The X-10 can be equipped with additional options designed to improve equipment operation, maintenance, and convenience:

2,000 PSI hydraulic pressure washer

Vogel automatic lubrication system

Spare tire mount

Pendant or wireless remote

Skid-mounted configuration with forklift tubing

X-10 Solid State Control Piston Pump Specifications
Specification X-10
Pump Type 3-inch x 24-inch Ultra High Pressure Swing Tube
Pump Pressure 2,200 PSI
Output 0–12 Cubic Yards Per Hour
Discharge 3 inches
Hopper 2,500 lb. Capacity Swing-Out Receiving Hopper with Hydraulic Agitator
Operating Platform 22 sq. ft.
Electrical Control Solid-State Valve Control
Trailer Single 6,000 lb. Capacity Axle with Electric Braking and Lights
Dimensions 156 x 76 x 80 inches
Weight 4,500 lbs.
Applications of the X-10 Piston Pump

The X-10 is designed for demanding applications where high-pressure material pumping and dependable equipment operation are essential.

Common applications include:

Refractory pumping

Shotcrete placement

Castable material pumping

Industrial refractory applications

High-pressure construction projects

Material placement requiring extended pumping distances

Its high-pressure pumping capability and hydraulic hopper agitation make it a practical solution for professional contractors.

Built for Easy Operation and Maintenance

The X-10 is designed to make everyday pumping and maintenance as straightforward as possible. The swing-out hopper provides quick access to the swing tube, while the hydraulic agitator helps maintain material movement inside the receiving hopper.

The solid-state control system provides reliable electrical control, while the forklift tubing mounted to the lower hopper facilitates flat-pack removal.

Together, these features create a pump designed around productivity, accessibility, and ease of operation.

Fast Return on Investment

Contractors need equipment that can contribute to productivity while limiting unnecessary downtime. The X-10 is designed to provide a strong combination of pumping pressure, production capacity, and maintenance accessibility.

With up to 12 cubic yards per hour output and 2,200 PSI piston face pressure, the X-10 can handle demanding pumping requirements while its service-friendly design helps simplify routine maintenance.

Why Choose the X-10 Solid State Control Piston Pump?

The X-10 solid state control piston pump is designed for contractors looking for a high-pressure pumping system with reliable controls and practical maintenance features.

Its combination of 2,200 PSI piston face pressure, up to 12 cubic yards per hour output, solid-state electronics, hydraulic hopper agitation, and swing-out hopper access makes it a versatile solution for refractory and shotcrete applications.

Whether the project involves industrial refractory work, shotcrete placement, or demanding castable applications, the X-10 is engineered to provide dependable high-pressure pumping performance.

Quote Now or Download the Brochure

Looking for a reliable solid state control piston pump for refractory or shotcrete applications?

The X-10 piston pump combines ultra-high-pressure pumping performance with reliable solid-state control, convenient maintenance access, and flexible power options.

Quote Now to discuss your application and equipment requirements, or Download the Brochure for additional information about the X-10.

SEO Keywords

solid state control piston pump

X-10 piston pump

X 10 piston pump

solid state piston pump

solid state control concrete pump

high pressure piston pump

ultra high pressure piston pump

refractory piston pump

refractory concrete pump

shotcrete piston pump

high pressure shotcrete pump

swing tube piston pump

2200 PSI piston pump

hydraulic piston pump

industrial piston pump

castable material pump

refractory pump machine

high pressure concrete pumping system

solid state pump control