Discover the Blastcrete RD6536 from a Concrete Pump Manufacturer
Choosing the right concrete pump manufacturer is important for construction companies seeking dependable pumping equipment, practical maintenance, and consistent performance. The Blastcrete RD6536 Skid Steer Pump is a hydraulic concrete pump attachment designed for contractors working with grout, shotcrete, and structural concrete mixes.
Using hydraulic squeeze pump technology, the RD6536 delivers variable output from 0 to 25 cubic yards per hour. Its universal skid steer mounting plate, manual hydraulic controls, and hydraulic remixer in the receiving hopper make it a versatile solution for suitable concrete pumping applications.
The RD6536 also features a 3-inch rubber pumping tube that can be replaced in the field in approximately 20 minutes. This maintenance-friendly design helps reduce downtime and simplifies routine wear-part replacement on construction sites.
Blastcrete RD6536 Hydraulic Concrete Pump Overview
The Blastcrete RD6536 is designed to support efficient material placement across a range of construction projects. It can pump suitable grout materials, 3/8-inch shotcrete, and structural concrete mixes containing aggregates up to 3/4 inch.
With variable pumping speed and a maximum stated output of 25 cubic yards per hour, operators can adjust material delivery according to project requirements. The pump requires hydraulic oil flow of 18 gallons per minute at 3,000 PSI and has a stated pump pressure of 400 PSI.
For contractors evaluating equipment from a concrete pump manufacturer, the RD6536 combines practical pumping capacity with skid steer compatibility and straightforward maintenance.
Key Features of the RD6536 Skid Steer Pump
The RD6536 includes features designed to support convenient operation and flexible construction applications.
3-inch hydraulic squeeze pump: Offers variable output from 0 to 25 cubic yards per hour.
Universal skid steer mounting plate: Designed for installation on compatible skid steer loaders.
Forklift pickup: Supports convenient equipment handling and positioning.
Manual hydraulic controls: Provide straightforward operating control.
Hydraulic remixer in the receiving hopper: Helps remix material inside the hopper.
Concrete mix capability: Handles suitable concrete mixes containing aggregates up to 3/4 inch.
Field-replaceable rubber pumping tube: The primary wear component can be replaced in approximately 20 minutes in the field.
These features make the RD6536 a practical option for contractors seeking versatile hydraulic concrete pumping equipment.
Why Equipment Design Matters When Choosing a Concrete Pump Manufacturer
When comparing concrete pump manufacturers and equipment models, buyers should consider pumping performance, material compatibility, serviceability, and operating requirements.
Reliable Pumping Performance
The RD6536 provides variable output up to 25 cubic yards per hour, allowing operators to adjust pumping speed to suit suitable applications and jobsite demands.
Convenient Maintenance
The replaceable 3-inch rubber pumping tube helps simplify routine wear-part servicing. Its approximate 20-minute field replacement time can help reduce interruptions during maintenance.
Reduced Material Contact with Moving Components
The hydraulic squeeze pump design keeps concrete material away from the pump's moving mechanical components, helping limit material-related wear on those parts.
Flexible Equipment Integration
The universal skid steer mounting plate is designed for compatible loaders, giving contractors a practical attachment configuration for their equipment fleet.
These considerations help buyers evaluate whether the RD6536 is suitable for their projects and long-term equipment needs.
Applications of the Blastcrete RD6536 Concrete Pump
The RD6536 Skid Steer Pump is designed for several construction applications when used with suitable materials and an appropriate pumping setup.
Grout pumping: For selected construction, filling, and repair applications.
Shotcrete placement: For compatible mixes containing 3/8-inch aggregate.
Structural concrete pumping: For suitable mixes containing aggregates up to 3/4 inch.
Skid steer-mounted concrete placement: For projects where a compatible skid steer-mounted pumping attachment is practical.
Actual output and pumping distance depend on mix design, aggregate characteristics, hose configuration, and site conditions.
Blastcrete RD6536 Skid Steer Pump Specifications
Review the following specifications to determine whether the RD6536 meets your project requirements.
Specification Details
Model RD6536
Equipment Type Hydraulic Concrete Pump Attachment
Pump Type Hydraulic Squeeze Pump
Pumping Tube 3-inch rubber tube
Variable Output 0–25 cubic yards per hour
Maximum Output 25 cubic yards per hour
Pump Outlet 3 inches
Pump Pressure 400 PSI
Hydraulic Oil Requirement 18 GPM at 3,000 PSI
Vertical Pumping Distance Up to 100 feet
Horizontal Pumping Distance Up to 250 feet
Length 76 inches
Length with Receiving Hopper 89 inches
Width 48 inches
Width with Receiving Hopper 55 inches
Height 48.25 inches
Charging Height 40.25 inches
Weight 2,700 lbs.
Mounting System Universal skid steer mounting plate
Controls Manual hydraulic controls
Hopper Feature Hydraulic remixer
Specifications are based on the supplied product information. Confirm current product details, hydraulic compatibility, and operating requirements before purchase.
What to Consider Before Purchasing a Concrete Pump
Before choosing the RD6536 or another concrete pump model, assess the equipment against your operating requirements.
Hydraulic compatibility: Confirm that the skid steer can provide 18 GPM at 3,000 PSI.
Material requirements: Verify that your grout, shotcrete, or concrete mix is compatible with the pump.
Required output: Determine whether a maximum capacity of 25 cubic yards per hour meets your production needs.
Pumping distances: Compare the stated vertical and horizontal distances with your site layout and hose configuration.
Maintenance and spare parts: Ask about replacement pumping tubes and recommended service procedures.
Supplier support: Request current pricing, availability, product documentation, and warranty information.
Evaluating these factors can help you select equipment that aligns with your project requirements.
Request a Quote for the RD6536 Skid Steer Pump
Looking for a concrete pump manufacturer and a suitable hydraulic pumping solution for your construction business? The Blastcrete RD6536 Skid Steer Pump offers adjustable output, versatile material handling, and convenient field replacement of its primary wear tube.
Its combination of hydraulic squeeze pump technology, skid steer mounting, and maintenance-friendly design makes it worth considering for suitable grout, shotcrete, and structural concrete applications.
Quote Now to inquire about current pricing, availability, delivery options, and equipment compatibility.
Download Brochure to review the RD6536 features and technical specifications before making your purchasing decision.
Contact the appropriate manufacturer or authorized supplier to confirm product details and identify the right concrete pumping solution for your jobsite.
Concrete Pump Manufacturer Blastcrete RD6536 Skid Steer Pump
