Find a Reliable Concrete Pump for Structural Concrete Applications
Choosing the right concrete pump for structural concrete is essential for contractors who need efficient material delivery, consistent jobsite performance, and practical equipment maintenance. The Blastcrete RD6536 Skid Steer Pump is a hydraulic squeeze pump attachment designed to handle suitable grout materials, shotcrete, and structural concrete mixes containing aggregates up to 3/4 inch.
With variable output from 0 to 25 cubic yards per hour, the RD6536 offers adjustable pumping performance for different construction requirements. Its universal skid steer mounting plate, manual hydraulic controls, and hydraulic remixer in the receiving hopper make it a practical option for contractors seeking versatile concrete pumping equipment.
The pump also features a 3-inch rubber pumping tube that can be replaced in the field in approximately 20 minutes. This design simplifies maintenance of the primary wear component and can help reduce service interruptions on construction sites.
Blastcrete RD6536 for Structural Concrete Pumping
The Blastcrete RD6536 is designed for concrete placement applications where a hydraulic squeeze pump can provide a suitable material delivery solution. It can pump compatible grout materials, 3/8-inch shotcrete, and structural concrete mixes containing aggregates up to 3/4 inch.
Its variable-speed pumping system allows operators to adjust output according to material requirements and jobsite conditions. The pump offers a maximum stated output of 25 cubic yards per hour, a 3-inch outlet, and a stated pump pressure of 400 PSI.
The hydraulic system requires 18 gallons per minute at 3,000 PSI. Contractors should confirm that their skid steer loader meets these hydraulic requirements and that the intended concrete mix is compatible with the pump before starting work.
Key Features of the RD6536 Concrete Pump
The RD6536 includes several features designed to support practical operation and maintenance.
3-inch hydraulic squeeze pump: Offers variable output from 0 to 25 cubic yards per hour.
Universal skid steer mounting plate: Designed for compatible skid steer loaders.
Forklift pickup: Supports convenient handling and positioning.
Manual hydraulic controls: Provide straightforward operating control.
Hydraulic remixer in the receiving hopper: Helps remix material within the hopper.
Structural concrete capability: Designed to handle suitable concrete mixes containing aggregates up to 3/4 inch.
Field-replaceable rubber pumping tube: The primary 3-inch wear tube can be replaced in approximately 20 minutes.
These features make the RD6536 worth considering for contractors who need an adaptable concrete pump for structural concrete and other suitable pumping applications.
Applications of a Concrete Pump for Structural Concrete
Structural concrete pumping requires equipment that can handle the selected mix and deliver material to the required placement location. The RD6536 can support several applications when the material, hose arrangement, and operating conditions are suitable.
Structural Concrete Placement
The RD6536 is designed to pump suitable structural concrete mixes containing aggregates up to 3/4 inch. This capability can support selected construction and concrete placement projects.
Grout Pumping
The pump can handle compatible grout materials for appropriate filling, repair, and construction applications.
Shotcrete Pumping
The RD6536 supports suitable shotcrete mixes containing 3/8-inch aggregate, making it an option for compatible shotcrete placement work.
Skid Steer-Mounted Concrete Delivery
Its mounting configuration allows the pump to be used with compatible skid steer loaders, offering contractors an attachment-based approach to material delivery.
Actual output and pumping distance depend on the concrete mix, aggregate characteristics, hose configuration, and site conditions. Always verify mix suitability with the manufacturer before pumping structural concrete.
Benefits of the RD6536 Hydraulic Squeeze Pump
Adjustable Pumping Output
The variable output range of 0 to 25 cubic yards per hour allows operators to adjust material delivery according to project requirements.
Maintenance-Friendly Design
The replaceable 3-inch rubber pumping tube can be changed in the field in approximately 20 minutes, helping simplify routine wear-part servicing.
Reduced Material Contact with Moving Components
The squeeze pump design keeps concrete material away from the pump's moving mechanical components, helping limit material-related wear on those parts.
Practical Equipment Integration
The universal skid steer mounting plate is designed for compatible loaders, helping contractors integrate the pump into their existing equipment fleet.
Together, these features provide practical advantages for construction businesses that need flexible concrete pumping equipment.
RD6536 Skid Steer Pump Specifications
Review the following specifications when comparing concrete pumps for structural concrete applications.
Specification Details
Model RD6536
Equipment Type Skid Steer Concrete Pump Attachment
Pump Type Hydraulic Squeeze Pump
Pumping Tube 3-inch rubber tube
Variable Output 0–25 cubic yards per hour
Maximum Output 25 cubic yards per hour
Pump Outlet 3 inches
Pump Pressure 400 PSI
Hydraulic Oil Requirement 18 GPM at 3,000 PSI
Vertical Pumping Distance Up to 100 feet
Horizontal Pumping Distance Up to 250 feet
Length 76 inches
Length with Receiving Hopper 89 inches
Width 48 inches
Width with Receiving Hopper 55 inches
Height 48.25 inches
Charging Height 40.25 inches
Weight 2,700 lbs.
Mounting System Universal skid steer mounting plate
Controls Manual hydraulic controls
Hopper Feature Hydraulic remixer
Specifications are based on the supplied product information. Confirm current specifications, machine compatibility, and operating requirements before purchase.
How to Choose a Concrete Pump for Structural Concrete
Before selecting the RD6536 for your project, evaluate the following factors to determine whether it meets your needs.
Concrete mix compatibility: Confirm that the structural concrete mix and aggregate size are suitable for the pump.
Hydraulic requirements: Verify that your skid steer provides 18 GPM at 3,000 PSI.
Required output: Determine whether the maximum stated capacity of 25 cubic yards per hour meets your production requirements.
Pumping distance: Compare the stated vertical and horizontal distances with your site layout and hose configuration.
Maintenance requirements: Ask about replacement pumping tubes, spare parts, and recommended service intervals.
Equipment compatibility: Check the loader's mounting system, operating capacity, and hydraulic specifications.
Technical documentation: Request the latest brochure and confirm operating requirements with the supplier.
Careful evaluation helps ensure that the selected pump is suitable for the material and working conditions.
Request a Quote for the Blastcrete RD6536
Looking for a concrete pump for structural concrete applications? The Blastcrete RD6536 Skid Steer Pump offers variable pumping output, suitable structural concrete handling capabilities, and a field-replaceable rubber pumping tube.
Its hydraulic squeeze pump design and skid steer mounting configuration make it an option for contractors who need versatile concrete pumping equipment for appropriate construction applications.
Quote Now to request current pricing, availability, delivery information, and equipment compatibility details.
Download Brochure to review the RD6536 features and technical specifications before making your purchasing decision.
Contact your preferred equipment supplier to determine whether the RD6536 meets your structural concrete pumping requirements.
Concrete Pump for Structural Concrete Blastcrete RD6536 Skid Steer Pump
