Looking for reliable industrial refractory pump equipment for demanding high-temperature industrial applications? The Blastcrete MX-10 Mixer/Pump is an ultra-high-pressure mixing and pumping system designed for dense refractory shotcrete and pump-cast installations. It combines a high-torque hydraulic pan mixer with a 3-inch swing tube piston pump to support efficient material preparation and delivery during demanding refractory projects.
Since 1996, the MX-10 has been recognized as an established solution for monolithic refractory installations. With a specified pumping pressure of 2,200 PSI and a stated material delivery capacity of up to 10 tons per hour, this machine is designed to handle challenging refractory installation requirements.
The MX-10 is also commonly used to pump suitable refractory materials over vertical distances exceeding 300 feet, depending on material properties and job-site conditions. Its swing-out receiving hopper provides convenient access to the lower hopper and swing tube section for cleaning and maintenance.
Request a Quote or Download the Brochure to learn more about the Blastcrete MX-10 industrial refractory pump.
What Is the Blastcrete MX-10 Industrial Refractory Pump?
The Blastcrete MX-10 is a specialized refractory mixer and pump designed for dense refractory shotcrete and pump-cast applications. It integrates material mixing and high-pressure pumping into one system, helping contractors prepare and deliver refractory materials for industrial installation projects.
The equipment combines a 2,200-pound-capacity high-torque hydraulic pan mixer with a 3-inch × 24-inch ultra-high-pressure swing tube piston pump. This configuration is designed to support consistent material preparation and pumping for demanding refractory applications.
The MX-10 is suitable for projects involving monolithic refractory installations in industrial furnaces, kilns, boilers, and other high-temperature processing equipment, provided the selected material and installation method are compatible with the machine.
For contractors searching for an industrial refractory pump, the MX-10 offers an integrated solution that combines mixing capacity, high-pressure pumping, and practical maintenance features.
Key Features of the MX-10 Industrial Refractory Pump
1. Ultra-High-Pressure Piston Pump
The MX-10 features a 3-inch × 24-inch ultra-high-pressure swing tube piston pump with a specified pumping pressure of 2,200 PSI.
This pumping system is designed for dense refractory shotcrete and pump-cast applications where reliable material delivery is essential.
Its high-pressure configuration supports refractory installation projects involving demanding material characteristics and extended pumping distances.
2. High-Torque Hydraulic Pan Mixer
The MX-10 incorporates a hydraulic pan mixer with a capacity of 2,200 pounds.
The mixer has a stated mixing time of approximately 1.5 to 2 minutes, supporting material preparation for industrial refractory applications.
Proper mixing is important for achieving the consistency required for pumping and placement. Mixing procedures should follow the refractory manufacturer's specifications and the requirements of the intended installation.
3. Material Delivery Capacity of Up to 10 Tons per Hour
The MX-10 is designed to deliver up to 10 tons of refractory material per hour under suitable operating conditions.
Its technical specifications also list a volumetric output range of 0–12 cubic yards per hour. Actual production depends on material density, mix formulation, pumping distance, and job-site conditions.
This capacity makes the MX-10 worth considering for industrial projects requiring substantial refractory material placement.
4. Vertical Pumping Capability
The MX-10 is commonly used to pump suitable refractory materials over vertical distances exceeding 300 feet.
This capability can support industrial installations where refractory materials must be delivered to elevated or difficult-to-access locations.
Actual pumping distance depends on the material formulation, pipeline diameter and layout, elevation, and operating conditions.
5. Swing-Out Receiving Hopper
The MX-10 features a swing-out receiving hopper with a stated capacity of 2,500 pounds and a hydraulic agitator.
The swing-out design provides access to the lower hopper and swing tube section for cleaning and maintenance. Forklift tubing mounted to the lower hopper also facilitates flat-pack removal.
These features help simplify access for appropriate maintenance and equipment handling procedures.
6. Integrated Water Measurement System
The MX-10 includes a Fill-Rite water meter and a 20-gauge dousing bucket designed for rapid water introduction.
These features support water measurement and material preparation. Water addition should always follow the refractory manufacturer's recommended mix design and installation procedures.
7. Solid-State Electronic Controls
The MX-10 features solid-state electronics and solid-state valve control. The equipment is also listed with CE certification.
Contractors should confirm the applicable certification documentation, electrical configuration, and compliance requirements for their installation location.
Applications of Industrial Refractory Pump Equipment
Industrial Furnace Refractory Installation
Industrial furnaces rely on refractory linings to withstand high temperatures and demanding operating conditions. The MX-10 is designed to mix and pump suitable refractory materials for monolithic installation projects.
Cement Kilns and Industrial Kiln
Industrial Refractory Pump Blastcrete MX-10 Mixer/Pump
