MX-10 Refractory Gunning Equipment for High-Performance Refractory Installation
Choosing the right refractory gunning equipment is essential for efficient refractory installation, consistent material delivery, and reliable performance in demanding industrial environments. The MX-10 Mixer / Pump is an ultra-high-pressure, 3-inch swing tube machine designed for dense refractory shotcrete and pump-cast applications.
Since 1996, the MX-10 has established a strong reputation in monolithic refractory installations. Combining a high-torque hydraulic pan mixer with an ultra-high-pressure piston pump, this advanced refractory equipment is designed to handle demanding material placement operations in industries where performance and reliability matter.
The MX-10 can consistently deliver approximately 10 tons of refractory material per hour under suitable operating conditions. It is also commonly used for vertical pumping applications exceeding 300 feet, making it a valuable solution for challenging industrial refractory projects.
What Makes the MX-10 an Effective Refractory Gunning Solution?
Refractory gunning and shotcrete applications require equipment capable of preparing, handling, and delivering specialized refractory materials efficiently. The MX-10 integrates mixing and pumping functions into one machine to support demanding installation requirements.
Key features include:
Ultra-high-pressure pumping: Provides 2,200 PSI piston-face pressure for demanding refractory pump-cast and shotcrete applications.
High-capacity material mixing: A 2,200 lb. hydraulic pan mixer supports efficient material preparation with a typical mixing time of 1.5–2 minutes.
High material output: Offers a specified output range of 0–12 cubic yards per hour, depending on material characteristics and operating conditions.
Convenient maintenance access: The swing-out receiving hopper simplifies access to the swing tube section for cleaning and maintenance.
Easy material handling: Integrated forklift tubing supports convenient lower hopper and flat-pack removal.
Reliable electronic controls: Solid-state electronics support dependable machine operation.
Flexible power configurations: Available with diesel engine or dual electric motor options.
CE certification: Designed with the manufacturer's stated CE certification.
These features make the MX-10 a practical option for refractory contractors and industrial maintenance teams seeking versatile refractory pumping equipment.
Applications of Refractory Gunning Equipment
Refractory gunning equipment is used to place refractory materials in industrial environments where surfaces must withstand high temperatures, thermal cycling, and demanding operating conditions. The MX-10 is designed for dense refractory shotcrete and pump-cast applications.
Typical applications include:
Industrial furnace and kiln refractory installation
Steel plant refractory maintenance
Cement industry refractory lining projects
Monolithic refractory installation
Dense refractory castable pumping
Refractory shotcrete and pump-cast operations
Industrial equipment requiring high-temperature protective linings
Elevated refractory material delivery for demanding installation projects
The suitability of the MX-10 for a specific gunning or shotcrete process depends on the refractory material, installation method, hose and nozzle arrangement, and project requirements.
Advanced Features of the MX-10 Mixer / Pump
1. Ultra-High-Pressure Swing Tube Pump
The MX-10 features a 3-inch × 24-inch ultra-high-pressure swing tube pump engineered for demanding refractory installation work. Its specified maximum pressure of 2,200 PSI supports high-pressure pumping applications involving suitable dense refractory materials.
2. High-Torque Hydraulic Pan Mixer
Consistent material preparation is an important part of refractory installation. The MX-10 incorporates a 2,200 lb. capacity hydraulic pan mixer with a typical mixing cycle of 1.5–2 minutes, helping operators prepare refractory mixtures efficiently.
3. Swing-Out Receiving Hopper
Maintenance access is an important consideration when selecting refractory gunning equipment. The MX-10's swing-out receiving hopper allows easier access to the swing tube section for cleaning, inspection, and routine maintenance.
The lower hopper also includes forklift tubing to simplify removal and material handling.
4. Water Meter and Rapid Water Introduction
The machine is equipped with a Fill-Rite water meter and a 20-gauge dousing bucket for fast water introduction. These components support the mixing process while allowing operators to follow the water requirements specified for the refractory material.
5. Reliable Electronic Control System
Solid-state electronic controls are designed to support reliable operation in industrial environments. This control configuration complements the MX-10's integrated mixing and pumping system.
6. Flexible Transport and Lifting Design
The MX-10 includes a central four-point crane pickup that does not require a spreader bar. Its trailer configuration features dual 6,000 lb. capacity axles, electric brakes, and lights to support equipment transportation.
MX-10 Refractory Gunning Equipment Specifications
The following table provides the main technical specifications of the MX-10 Mixer / Pump.
Specification Details
Equipment Type Refractory mixer / pump
Pump Type Ultra-high-pressure swing tube
Pump Dimensions 3" × 24"
Maximum Pump Pressure 2,200 PSI
Mixer Type Hydraulic pan mixer
Mixer Capacity 2,200 lb.
Output Capacity 0–12 cubic yards per hour
Discharge Size 3 inches
Receiving Hopper Capacity 2,500 lb.
Hopper Configuration Swing-out hopper with hydraulic agitator
Operating Platform 22 sq. ft.
Crane Pickup Central four-point pickup
Electrical Controls Solid-state valve control
Trailer Dual 6,000 lb. capacity axles
Braking and Lighting Electric brakes and lights
Overall Dimensions 204" × 88" × 117"
Machine Weight 9,000 lb.
Certification CE certification, as specified by the manufacturer
Specifications should be confirmed with the manufacturer for the selected machine configuration. Actual output and pumping performance depend on material properties and job-site conditions.
Available Power Options
The MX-10 refractory gunning equipment is available with several power configurations to suit different site conditions and operating requirements.
Diesel-Powered Options
John Deere 4045T: 99 HP water-cooled diesel engine
Deutz BF4M 2012: 102 HP water-cooled diesel engine
Electric-Powered Option
Dual electric motors: Two 40 HP electric motors
These configurations give contractors
Refractory Gunning Equipment MX-10 Mixer / Pump for Industrial Applications
