Power plants operate under demanding industrial conditions where high temperatures and continuous operations place significant demands on refractory linings. Boilers, furnaces, combustion chambers, and other high-temperature processing equipment require reliable refractory installation and maintenance solutions. Choosing the right power plant refractory pump is essential for contractors handling refractory shotcrete, pump cast, and monolithic refractory applications.
The MX-10 Mixer / Pump is an ultra-high-pressure 3-inch swing tube mixer/pump specifically designed for dense refractory shotcrete and pump cast applications. Combining a powerful high-torque hydraulic pan mixer with an ultra-high-pressure piston pump, the MX-10 delivers efficient material mixing and dependable pumping performance for demanding industrial projects.
Since 1996, the MX-10 has become an industry-standard machine for monolithic refractory installations. It can consistently deliver approximately 10 tons of material per hour and is commonly used to pump refractory materials more than 300 feet vertically.
For power plant maintenance teams and refractory installation contractors, the MX-10 provides a powerful equipment solution for challenging industrial refractory projects.
MX-10 Mixer / Pump – Advanced Power Plant Refractory Pumping Equipment
Power plant refractory installations require specialized equipment capable of handling dense refractory materials while maintaining consistent mixing and pumping performance.
From boiler refractory repairs to combustion chamber lining installations, contractors need reliable equipment that can prepare and deliver refractory materials efficiently.
The MX-10 is engineered to support these demanding applications through its combination of high-pressure piston pumping and high-capacity mixing technology.
Its 3-inch x 24-inch ultra-high-pressure swing tube pump generates up to 2,200 PSI piston face pressure, making it suitable for rugged refractory pump cast and shotcrete applications.
The integrated 2,200 lb. capacity high-torque hydraulic pan mixer provides efficient material preparation with a mixing cycle of approximately 1.5 to 2 minutes.
With the ability to consistently deliver approximately 10 tons per hour and pump refractory materials more than 300 feet vertically, the MX-10 is designed for demanding industrial refractory installations.
Why Choose the MX-10 Power Plant Refractory Pump?
Selecting the right power plant refractory pump can help contractors improve material preparation, support consistent pumping performance, and simplify demanding refractory installation work.
The MX-10 offers several important advantages:
High-Pressure Pumping: Generates up to 2,200 PSI piston face pressure for demanding refractory applications.
Vertical Pumping Capability: Commonly used to pump refractory materials more than 300 feet vertically.
High-Capacity Mixing: Features a 2,200 lb. capacity hydraulic pan mixer.
Fast Mixing Cycle: Provides approximately 1.5 to 2-minute mixing cycles.
Consistent Material Delivery: Designed to deliver approximately 10 tons per hour.
Convenient Maintenance: Swing-out receiving hopper provides easy access to the swing tube section.
Efficient Material Handling: Integrated forklift tubing supports easy flat-pack removal.
Flexible Power Options: Available with diesel and electric motor configurations.
Reliable Controls: Equipped with solid-state electronic controls.
Industrial Performance: Designed for demanding refractory shotcrete and pump cast applications.
These capabilities make the MX-10 a valuable solution for contractors working on power plant refractory installation and maintenance projects.
Key Features of the MX-10 Refractory Mixer / Pump
1. Ultra-High-Pressure Swing Tube Pump
The MX-10 features a 3-inch x 24-inch ultra-high-pressure swing tube pump capable of generating 2,200 PSI piston face pressure. It is designed for rugged refractory pump cast and shotcrete applications.
2. High-Torque Hydraulic Pan Mixer
The 2,200 lb. capacity hydraulic pan mixer provides efficient refractory material preparation with a mixing cycle of approximately 1.5 to 2 minutes.
3. Swing-Out Receiving Hopper
The specially designed swing-out receiving hopper provides convenient access to the lower hopper and swing tube section, making cleaning and routine maintenance easier.
4. Integrated Forklift Tubing
Forklift tubing mounted to the lower hopper supports convenient flat-pack removal and simplifies equipment handling.
5. Fill-Rite Water Meter
The integrated Fill-Rite water meter helps operators monitor water introduction during the mixing process.
6. Fast Water Introduction
A 20-gauge dousing bucket provides convenient water addition during material preparation.
7. Reliable Solid-State Electronics
Solid-state electronic controls support dependable machine operation in demanding industrial environments.
8. CE Certification
The MX-10 features CE certification for applicable equipment compliance requirements.
MX-10 Power Options for Power Plant Applications
Different power plants and industrial facilities have different operating requirements. The MX-10 Mixer / Pump offers multiple power configurations to accommodate various project environments.
Available power options include:
John Deere 4045T: 99 HP water-cooled diesel engine.
Deutz BF4M 2012: 102 HP water-cooled diesel engine.
Electric Configuration: Dual 40 HP electric motors.
These configurations allow contractors to select the appropriate power source based on jobsite conditions and available infrastructure.
Optional Accessories for the MX-10
The MX-10 can be equipped with several optional accessories to improve operational flexibility and maintenance convenience.
Available options include:
2,000 PSI hydraulic pressure washer.
Vogel automatic lubrication system.
Mounted spare tire.
Pendant or wireless remote control.
Skid-mounted configuration with forklift tubing.
These accessories allow contractors to configure the equipment according to their specific power plant refractory installation requirements.
MX-10 Power Plant Refractory Pump Specifications
Explore the detailed technical specifications of the MX-10 Mixer / Pump:
Specification Details
Pump 3" x 24" Ultra-High-Pressure Swing Tube
Pump Pressure 2,200 PSI
Mixer 2,200 lb. Capacity Hydraulic Pan Mixer
Output 0–12 Cubic Yards Per Hour
Discharge 3 Inches
Hopper 2,500 lb. Capacity Swing-Out Receiving Hopper with Hydraulic Agitator
Operating Platform 22 sq. ft.
Crane Pickup Central Four-Point Pickup – No Spreader Bar Needed
Electrical Solid-State Valve Control
Trailer Dual 6,000 lb. Capacity Axles with Electric Braking and Lights
Dimensions 204" x 88" x 117"
Weight 9,000 lbs.
Applications of the MX-10 in Power Plants
The MX-10 is designed for specialized refractory applications where high-pressure pumping, efficient mixing, and consistent material delivery are essential.
Potential power plant applications include:
Boiler refractory lining installations.
Boiler furnace refractory repairs.
Combustion chamber refractory installation.
Power plant furnace maintenance.
Industrial refractory shotcrete applications.
Monolithic refractory construction.
Refractory pump cast installations.
Industrial chimney and vertical refractory applications.
Refractory material pumping exceeding 300 feet vertically.
The MX-10 supports contractors working on demanding power plant
Power Plant Refractory Pump Discover the MX-10 Mixer / Pump
