When it comes to demanding industrial pumping applications, choosing the right equipment is essential for achieving reliable performance, productivity, and long-term value. The MX-10 Industrial Concrete Mixer Pump is a high-pressure mixing and pumping solution engineered specifically for dense refractory shotcrete and pump-cast applications.
With its powerful hydraulic pan mixer and ultra-high-pressure piston pump, the MX-10 is designed to handle challenging industrial installations. Since 1996, this machine has been widely used in monolithic refractory applications, delivering dependable performance in demanding working environments.
MX-10 – Advanced Industrial Concrete Mixer Pump
The MX-10 combines a high-torque hydraulic mixer with a 3-inch ultra-high-pressure swing tube pumping system. Its powerful design enables consistent material mixing and pumping, making it suitable for refractory contractors and industrial maintenance projects.
The machine can consistently deliver approximately 10 tons of refractory material per hour and is commonly used for vertical pumping applications exceeding 300 feet, depending on material properties and jobsite conditions.
Whether you are working on industrial furnace linings, steel plants, cement kilns, boilers, or other refractory installations, the MX-10 provides a practical solution for demanding material placement requirements.
Key Features of the MX-10 Mixer / Pump
The MX-10 is engineered with features that support efficient operation, convenient maintenance, and dependable pumping performance.
2200 PSI Piston Face Pressure: Designed for demanding refractory pump-cast and shotcrete applications.
High-Torque Hydraulic Pan Mixer: Features a 2,200 lb. mixing capacity with an approximate mixing time of 1.5–2 minutes.
Swing-Out Receiving Hopper: Provides convenient access to the swing tube section for cleaning and maintenance.
Forklift Tubing: Integrated into the lower hopper for easier flat-pack removal.
Fill-Rite Water Meter: Supports controlled water introduction during mixing.
20-Gauge Dousing Bucket: Allows fast water introduction into the mixing system.
Solid-State Electronics: Provides reliable machine control.
CE Certification: Designed with CE-certified equipment requirements.
Multiple Power Options for Industrial Applications
The MX-10 offers different power configurations to accommodate various jobsite requirements.
Available power options include:
John Deere 4045T, 99 HP water-cooled diesel engine.
Deutz BF4M 2012, 102 HP water-cooled diesel engine.
Dual 40 HP electric motors.
These configurations provide flexibility when selecting an MX-10 for industrial facilities and different operating environments.
Optional Equipment and Accessories
Additional options are available to enhance machine convenience and operational flexibility.
2,000 PSI hydraulic pressure washer.
Vogel automatic lubrication system.
Mounted spare tire.
Pendant or wireless remote control.
Skid-mounted configuration with forklift tubing.
MX-10 Industrial Concrete Mixer Pump Specifications
The MX-10 features a heavy-duty design developed for demanding refractory material mixing and pumping applications.
Specification Details
Model MX-10 Mixer / Pump
Pump Type 3" x 24" Ultra High-Pressure Swing Tube
Pump Pressure 2200 PSI
Mixer 2200 lb. Hydraulic Pan Mixer
Output 0–12 Cubic Yards Per Hour
Discharge 3 Inches
Hopper Capacity 2,500 lb.
Hopper System Swing-Out with Hydraulic Agitator
Operating Platform 22 sq. ft.
Crane Pickup Central Four-Point Pickup
Electrical Control Solid-State Valve Control
Trailer Dual 6,000 lb. Capacity Axles
Braking System Electric Brakes and Lights
Dimensions 204" x 88" x 117"
Weight 9,000 lbs.
Applications
Industrial Concrete Mixer Pump Discover the Powerful MX-10 Mixer / Pump
