Advanced Häny Cement Mixing and High-Pressure Injection Equipment in Abu Dhabi, Dubai, Sharjah and the Middle East – ACE CENTRO ENTERPRISES
ACE CENTRO ENTERPRISES provides professional Häny grouting equipment and advanced cement injection solutions for construction, foundation engineering, tunnelling, underground infrastructure, and geotechnical projects throughout Abu Dhabi, Dubai, Sharjah, and the wider Middle East.
Modern construction projects require reliable grouting machinery capable of preparing consistent cement suspensions, maintaining material uniformity, and delivering grout under controlled pressure. Advanced compact injection plants combine mixing, agitation, and pumping functions to support demanding construction and foundation engineering applications.
ACE CENTRO ENTERPRISES focuses on providing professional equipment solutions featuring the Häny Compact Grout Plant IC 650, Häny Injecto-Compact IC 650, Häny ZMP 710 Grout Pump, Häny ZMP 712 Grout Pump, and Häny ZMP 725 Grout Pump.
These equipment solutions are suitable for various cement grouting, ultrafine cement injection, bentonite suspension preparation, foundation treatment, and underground construction applications.
Häny Compact Grout Plant IC 650 – Professional Integrated Grouting Technology
The Häny Compact Grout Plant IC 650 is an integrated mixing and injection system designed for professional construction and geotechnical grouting operations.
The compact plant combines three essential equipment components:
HCM High Shear Mixer for cement and grout preparation.
HRW Agitator for maintaining suspension consistency.
ZMP Grout Pump for controlled material delivery and injection.
This integrated arrangement supports efficient preparation and pumping of cement-based suspensions while maintaining a compact and practical equipment configuration.
Key features of Häny Compact Grout Plant IC 650 include:
Compact mixing and injection arrangement.
High-performance cement mixing.
Efficient ultrafine cement preparation.
Continuous grout agitation.
Integrated high-pressure pumping.
Ergonomic equipment arrangement.
Central lifting position.
Space-saving construction.
Detachable individual equipment components.
Practical access for operation and maintenance.
Typical applications include:
Foundation grouting.
Anchor grouting.
Soil nail injection.
Rock consolidation.
Sleeve pipe injection.
Contact grouting.
Tunnel construction.
Microtunnelling.
Pipe jacking.
Directional drilling.
Bentonite suspension preparation.
The IC 650 is particularly suitable for contractors requiring a coordinated mixing and injection arrangement for specialized construction operations.
Häny Injecto-Compact IC 650 – Advanced Cement Mixing and Injection Plant
The Häny Injecto-Compact IC 650 is designed to support professional cement grouting and injection operations through an integrated equipment arrangement.
Its combination of high-shear mixing, suspension agitation, and grout pumping supports efficient material preparation and delivery.
The system is suitable for projects requiring cement and ultrafine cement grouting, as well as bentonite suspension preparation for selected trenchless construction applications.
Major equipment functions include:
1. Cement and Ultrafine Cement Mixing
The mixing system prepares cement-based suspensions for specialized grouting applications.
2. Continuous Grout Agitation
The agitation unit supports suspension management and helps minimize particle settlement before pumping.
3. High-Pressure Grout Pumping
The ZMP pumping unit delivers prepared grout to designated injection locations according to the required operating conditions.
4. Compact Equipment Integration
The system organizes mixing, agitation, and pumping components into a practical installation arrangement.
Important advantages include:
Efficient grout preparation.
Compact installation footprint.
Coordinated mixing and injection.
Ergonomic operating arrangement.
Central lifting position.
Detachable equipment modules.
Suitable for different geotechnical applications.
Häny ZMP 710 Grout Pump – High-Pressure Cement Injection
The Häny ZMP 710 Grout Pump is designed for professional cement grouting and high-pressure injection applications.
It forms part of the IC 650 compact injection plant configuration and supports the delivery of prepared cement suspensions for foundation engineering, rock grouting, and underground construction.
The ZMP 710 is a single-acting pump configuration in the IC 650 equipment range.
Technical specifications:
Maximum capacity at W/C ratio 1: 5.0 m³/h.
Maximum operating pressure: 100 bar.
Nominal electrical power at 50 Hz: 17.5 kW.
Pump configuration: Single pump module.
Key applications include:
High-pressure cement grouting.
Foundation injection.
Rock fracture grouting.
Anchor grouting.
Soil consolidation.
Contact grouting.
Tunnel construction.
Geotechnical injection.
The Häny ZMP 710 supports construction operations requiring suitable pumping capacity and controlled grout delivery.
Häny ZMP 712 Grout Pump – Professional Industrial Grout Pumping
The Häny ZMP 712 Grout Pump is designed for specialized cement grout pumping and injection applications.
This pump configuration is available within the Häny IC 650 compact grouting plant range and supports professional construction operations requiring controlled material delivery.
Technical specifications:
Maximum capacity at W/C ratio 1: 4.9 m³/h.
Maximum operating pressure: 88 bar.
Nominal electrical power at 50 Hz: 17.5 kW.
Pump configuration: Single pump module.
Major applications include:
Cement suspension pumping.
Foundation grouting.
Rock consolidation.
Anchor injection.
Soil improvement.
Underground construction.
Tunnel grouting.
Geotechnical engineering.
The ZMP 712 provides an alternative pumping configuration within the IC 650 equipment range, allowing equipment selection according to project pressure and capacity requirements.
Häny ZMP 725 Grout Pump – Advanced High-Pressure Injection Technology
The Häny ZMP 725 Grout Pump is designed for specialized cement grouting applications requiring high-pressure pumping performance.
It is used in the IC 650 compact grouting plant configuration for transferring prepared grout to designated injection locations.
The ZMP 725 offers a double-acting pump configuration within this equipment arrangement.
Technical specifications:
Maximum capacity at W/C ratio 1: 5.0 m³/h.
Maximum operating pressure: 100 bar.
Nominal electrical power at 50 Hz: 19.0 kW.
Pump configuration: Double pump module.
Typical applications include:
High-pressure cement injection.
Foundation grouting.
Rock consolidation.
Anchor and soil nail grouting.
Sleeve pipe injection.
Contact grouting.
Tunnel stabilization.
Underground infrastructure.
Dam foundation treatment.
The ZMP 725 is suitable for applications requiring a double-acting pumping configuration and operating pressures up to 100 bar.
Häny IC 650 and ZMP Pump Technical Comparison
The following specifications provide a comparison of the three ZMP pump configurations available for the IC 650 plant.
Technical specification ZMP 710 ZMP 712 ZMP 725
Maximum capacity 5.0 m³/h 4.9 m³/h 5.0 m³/h
Maximum pressure 100 bar 88 bar 100 bar
Electrical power at 50 Hz 17.5 kW 17.5 kW 19.0 kW
Pump configuration Single Single Double
<caption>Maximum capacity figures are based on a water-to-cement ratio of 1. Actual performance depends on operating pressure, grout properties, and equipment configuration.</caption>
The IC 650 mixing and agitation arrangement includes:
Usable mixer content: 260 litres.
Agitator holding capacity: 350 litres.
Mixer circulation capacity: 1,400 litres/minute.
Maximum aggregate size: 8 mm.
These specifications help construction professionals evaluate suitable equipment configurations for different grouting applications.
Applications of Häny Compact Grout Plant IC 650
1. Foundation Grouting
Suitable equipment for cement injection and foundation treatment applications involving soil and rock formations.
2. Anchor and Soil Nail Grouting
Supports grout preparation and pumping for anchor systems, soil nails, and tension cable applications.
3. Rock Consolidation
Supports injection of suitable grout mixtures into accessible fractures and openings in rock formations.
4. Tunnel Construction
Provides grout preparation and pumping capabilities for selected tunnel construction and underground engineering operations.
5. Microtunnelling and Pipe Jacking
Supports preparation and pumping of bentonite suspensions for suitable trenchless construction applications.
6. Directional Drilling
Supports specialized bentonite suspension preparation and material handling requirements.
7. Contact Grouting
Supports preparation and controlled delivery of grout for selected contact injection applications.
8. Ultrafine Cement Injection
Provides mixing and pumping capabilities for suitable ultrafine cement grouting applications.
Häny Grouting Equipment for Construction Projects in UAE
ACE CENTRO ENTERPRISES supports professional Häny grouting equipment requirements throughout Abu Dhabi, Dubai, Sharjah, and the wider Middle East.
Abu Dhabi
Häny Compact Grout Plant IC 650, Injecto-Compact injection systems, and ZMP grout pumps for foundation engineering, industrial construction, and infrastructure development.
Dubai
Advanced cement mixing plants, high-pressure grout pumps, and compact injection equipment for underground construction, commercial infrastructure, and geotechnical applications.
Sharjah
Professional cement grouting machinery, integrated mixing and pumping systems, and foundation injection equipment for industrial and civil engineering projects.
Middle East
Häny grouting equipment solutions for foundation contractors, tunnelling specialists, infrastructure developers, and geotechnical engineering companies across the region.
Why Choose ACE CENTRO ENTERPRISES for Häny Grouting Equipment?
ACE CENTRO ENTERPRISES focuses on professional grouting machinery and cement injection solutions for demanding construction and infrastructure applications.
Our equipment solution areas include:
Häny Compact Grout Plant IC 650.
Häny Injecto-Compact IC 650.
Häny ZMP 710 Grout Pump.
Häny ZMP 712 Grout Pump.
Häny ZMP 725 Grout Pump.
HCM High Shear Mixing Technology.
HRW Agitator Systems.
Compact Cement Mixing Plants.
High-Pressure Injection Equipment.
Industrial Grout Pumping Systems.
Foundation and Geotechnical Grouting Machinery.
We focus on suitable equipment selection, practical plant configurations, efficient cement preparation, and reliable pumping solutions for specialized construction projects.
Frequently Asked Questions
1. What is the Häny Compact Grout Plant IC 650?
The Häny IC 650 is an integrated grouting plant combining an HCM High Shear Mixer, HRW Agitator, and ZMP Grout Pump for cement mixing and injection applications.
2. What is the difference between Häny IC 650 and Injecto-Compact IC 650?
Both names refer to the IC 650 compact injection plant system. Injecto-Compact is the equipment system designation.
3. What is the maximum capacity of the Häny ZMP 710?
The ZMP 710 has a maximum capacity of 5.0 m³/h at a water-to-cement ratio of 1 and a maximum pressure of 100 bar.
4. What is the maximum pressure of the Häny ZMP 712?
The ZMP 712 has a maximum operating pressure of 88 bar and a maximum capacity of 4.9 m³/h at a water-to-cement ratio of 1.
5. What is the maximum pressure of the Häny ZMP 725?
The ZMP 725 has a maximum operating pressure of 100 bar and a maximum capacity of 5.0 m³/h at a water-to-cement ratio of 1.
6. Which ZMP pump is suitable for high-pressure grouting?
The ZMP 710 and ZMP 725 configurations offer maximum operating pressures of 100 bar. Selection should consider the required pumping capacity and operating conditions.
7. Can the IC 650 be used for bentonite suspension preparation?
Yes. The IC 650 is suitable for preparing and pumping bentonite suspensions for applications such as microtunnelling, pipe jacking, and directional drilling.
8. Where can I find Häny IC 650 and ZMP Grout Pumps in UAE?
ACE CENTRO ENTERPRISES supports Häny grouting equipment requirements in Abu Dhabi, Dubai, Sharjah, and throughout the wider Middle East.
ACE CENTRO ENTERPRISES – Your Häny Compact Grouting Equipment Partner in UAE
Looking for Häny Compact Grout Plant IC 650, Häny Injecto-Compact IC 650, Häny ZMP 710 Grout Pump, Häny ZMP 712 Grout Pump, or Häny ZMP 725 Grout Pump?
ACE CENTRO ENTERPRISES supports construction contractors, foundation engineering specialists, tunnelling companies, and infrastructure developers with professional cement mixing, grouting, and injection equipment solutions.
From compact cement mixing and ultrafine grout preparation to high-pressure pumping, rock consolidation, foundation injection, and trenchless construction, our equipment solutions support demanding engineering applications.
ACE CENTRO ENTERPRISES – Professional Häny Compact Grout Plants, Injecto-Compact IC 650 Systems and ZMP High-Pressure Grout Pumps in Abu Dhabi, Dubai, Sharjah and Across the Middle East.
Hany Compact Grout Plant IC 650, Injecto-Compact IC 650 & ZMP Grout Pumps in UAE
