Efficient material mixing and controlled pumping are essential for many field-batching and flooring applications. The D6528 12 cubic yard per hour mixer pump combines a hydraulic spiral mixer, receiving hopper, and squeeze-pump system to provide contractors with an integrated solution for mixing and pumping compatible materials.
Designed for field batching and pumping, the D6528 can deliver output from 0 to 12 cubic yards per hour. Its combination of hydraulic components and flexible power options makes it a practical machine for applications including gypsum flooring.
D6528 12 Cubic Yard Per Hour Mixer Pump
The D6528 Mixer/Pump is designed to handle field batching and pumping in one integrated unit.
The machine features a 9-cubic-foot hydraulic spiral mixer. After the material has been mixed, the hydraulic system dumps it into a 12-cubic-foot receiving hopper.
From the hopper, material moves into the D6528's 3-inch hydraulic squeeze pump, which provides variable pumping speeds from 0 to 12 cubic yards per hour.
This integrated process allows contractors to mix and pump material directly at the jobsite.
Hydraulic Squeeze Pump for Gypsum Flooring
A key component of the D6528 is its hydraulic squeeze pump for gypsum flooring applications.
The 3-inch hydraulic squeeze pump is driven by a heavy-duty planetary gearbox and provides variable output control. This allows operators to regulate material flow according to the requirements of the flooring installation.
For gypsum flooring contractors, an integrated mixer and hydraulic squeeze pump can simplify material handling by combining batching and pumping operations into one machine.
Material compatibility and application requirements should always be evaluated before operation.
How the D6528 Mixer/Pump Works
The D6528 uses a straightforward material-handling process:
1. Material Mixing
The 9-cubic-foot hydraulic spiral mixer prepares the material. Its hydraulic system controls the mixer and allows the contents to be dumped when mixing is complete.
2. Hydraulic Dumping
The mixer hydraulically dumps the prepared material directly into the receiving hopper.
3. Material Management
The 12-cubic-foot receiving hopper includes a hydraulic agitator to help manage material before pumping.
4. Squeeze Pumping
The material enters the 3-inch hydraulic squeeze pump, which transfers it through the delivery system at a variable rate of up to 12 cubic yards per hour.
This sequence provides an integrated workflow from field batching through material pumping.
9-Cubic-Foot Hydraulic Spiral Mixer
The D6528 includes a 9-cubic-foot hydraulic spiral mixer designed for field batching.
The mixer features hydraulic dumping and a clean-out door. These features help simplify material transfer and routine cleaning after use.
The mixer works together with the receiving hopper and pump to create a complete mixing and pumping system.
12-Cubic-Foot Receiving Hopper
After mixing, the material is transferred into the D6528's 12-cubic-foot receiving hopper.
A hydraulic agitator is included to help manage the material before it reaches the squeeze pump. The hopper provides additional capacity between the mixing and pumping stages.
The combination of a 9-cubic-foot mixer and 12-cubic-foot receiving hopper supports continuous material handling during suitable field applications.
0–12 Cubic Yards Per Hour Output
The D6528 offers a variable output range of 0 to 12 cubic yards per hour.
This variable-speed pumping capability allows operators to adjust material delivery according to project requirements. A controlled pumping rate can be useful when installation conditions or material placement requirements change throughout the job.
The D6528 therefore provides flexibility for contractors who need a mixer pump capable of both lower and higher production rates.
D6528 Specifications
Specification D6528
Length 204 inches
Width 88 inches
Water Tank Height 89 inches
Mixer Height – Dump Position 86 inches
Charging Height 48 inches
Output Capacity 0–12 cubic yards per hour
Mixer Capacity 9 cubic feet
Receiving Hopper Capacity 12 cubic feet
These specifications provide useful information for contractors evaluating equipment dimensions, capacity, transportation, and jobsite requirements.
D6528 Power Options
The D6528 is available with two power configurations.
Kubota V1505 29 HP Water-Cooled Diesel
The diesel-powered configuration uses a Kubota V1505 29 HP water-cooled diesel engine. This option can provide greater flexibility for jobsites where electrical power is not readily available.
30 HP Electric Motor
The D6528 can also be equipped with a 30 HP electric motor with starter and disconnect for applications where electric power is accessible and preferred.
These options allow contractors to select the power source that best fits their operating environment.
D6528 Features
The D6528 includes a range of features designed to support field batching and pumping:
9-cubic-foot hydraulic spiral mixer
Hydraulic mixer dump
Hydraulic mixer clean-out door
12-cubic-foot receiving hopper
Hydraulic hopper agitator
3-inch hydraulic squeeze pump
Heavy-duty planetary gearbox
Variable output from 0–12 cubic yards per hour
Long-lasting pumping tubes
Diesel or electric power options
The integrated design combines the primary mixing and pumping functions in one machine.
D6528 for Gypsum Flooring Applications
The D6528 is a popular solution for gypsum flooring applications because it combines field mixing and pumping capabilities.
Gypsum flooring projects can require consistent material preparation and controlled delivery. The D6528's hydraulic mixer and variable-speed squeeze pump provide a system designed to handle these stages together.
The machine's 12-cubic-yard-per-hour maximum output provides contractors with a production-oriented option for suitable projects, while variable speed allows the pumping rate to be adjusted as needed.
Available Options
Contractors can customize the D6528 with several available options, including:
Pendant or wireless remote
150-gallon water tank with 2-inch flow meter
Mounted spare tire
Hydraulic pressure washer
Dual axles
Mounted air compressor
These options can add flexibility for transportation, cleaning, water management, and machine operation.
Why Choose the D6528 Mixer Pump?
The D6528 12 cubic yard per hour mixer pump combines mixing, material management, and pumping into one integrated system.
Its key advantages include:
12 Cubic Yards Per Hour: Variable pumping capacity from 0 to 12 cubic yards per hour.
Hydraulic Mixing: The 9-cubic-foot spiral mixer uses hydraulic operation and hydraulic dumping.
Hydraulic Squeeze Pump: The 3-inch pump provides controlled material delivery and is driven by a heavy-duty planetary gearbox.
Large Receiving Hopper: The 12-cubic-foot hopper includes a hydraulic agitator.
Flexible Power: Diesel and electric power configurations are available.
Multiple Options: Remote controls, water tanks, pressure washers, dual axles, and other accessories are available.
A Practical Solution for Field Batching
The D6528 provides contractors with an integrated approach to field batching and pumping. Rather than using separate machines for mixing and pumping, the system combines both functions in one unit.
For contractors searching for a hydraulic squeeze pump for gypsum flooring, the D6528 provides a combination of hydraulic mixing, variable-speed pumping, and material handling capacity.
Its maximum output of 12 cubic yards per hour makes it a suitable option for projects where production capacity and controlled material delivery are important considerations.
D6528 12 Cubic Yard Per Hour Mixer Pump for Gypsum Flooring
